User Manual of LaView Premium HD Digital Video Recorder
Chapter 5 Web and Client
55
User Manual of LaView Premium HD Digital Video Recorder
5.1 Web Operation
5.1.1 Network Connection
H&M Series
Check network connection by LCD on front panel, “ ” refers connection error.
P Series
Check B-Lamp on front panel, light indicates connection.
Set IP, subnet mask and gateway for computer and DVR. Please assign the same segment IP address without router, need to set the appropriate subnet mask and gateway with router.
The detail of DVR network configuration please see【Configuration】
→【Network Setting】
Ensure the IP is correct and check whether the DVR is on the network by using the Windows command “ping”.
5.1.2 The control installation and the user login logout
Users can remote access to DVR by Internet Explorer, assuming you have a correct network configuration.
The following interface will pop up when you access the IP address in Internet Explorer.
Figure 5. 1 Login Screen
56
User Manual of LaView Premium HD Digital Video Recorder
Install ActiveX: Right click and choose install. If installation is blocked by Windows, please add the IP as a trusted site or lower your Internet Explorer security settings to allow this.
Figure 5. 2 Install Control
The following interface will popup when you input your username, password and click “Login”.
Interface like Diagram 5-3 Web Interface when user login successfully. Click “Exit” to quit.
5.1.3 The Interface of Web Operations
Figure 5. 3 Web main interface
Index Name
1 Channel
Table 5. 1 Description of Main interface
Description
2
3
4
5
Function key
Surveillance window
Image color & other saturation
PTZ control
Channel selection
Local playback: playback local record
Open all: play live views in surveillance window
Change window layout
Image color: modify brightness, contrast and
Other: set capture path, record download path and reboot
PTZ control menu
57
6 Menu
User Manual of LaView Premium HD Digital Video Recorder
System configuration, record search, alarm setting, exit, etc.
5.1.4 The Real-time Monitoring
Into the WEB interface, select the focus window in live window, the focus window has a light blue border.
From the left channel column select channel, as shown in the following interface.
Figure 5. 4 Channel Choices interface
Click on 2 area in upper right corner can choose open / close the channel of the main stream or secondary stream, shows the current DVR's IP and rate information.
Figure 5. 5 Stream information interface
Lower left corner shows the current video channel name.
Upper right corner shows the current video time information.
Click “ ”(Lower left corner of the display window)to switch between single screen and multi-screen.
Lower right corner of the display window is function keys, as the following interface. Refer to area zoom, switching multi screens, local records, capturing and so on.
Figure 5. 6 Function Key interface
58
4
5
6
Index Name
1
2
3
User Manual of LaView Premium HD Digital Video Recorder
Table 5. 2 Description of Function Key
Description
Area zoom: Video images can be enlarged
Multi-screen switch: switch from single screen to multi-screen and vice versa
Local record: save and record video to a local HDD while in a live view. Set recording path in configuration
Capture: capture of the present channel, set the path in “other
Sound: on/off sound
Off video: off the focus window video
5.1.5 PTZ Control
Set protocol(see【Setting】
→【PTZ】)
Control PTZ direction, step size, zoom, IRIS, preset, tour, pattern, border scan, light, wiper, auto pan, etc.
Step size controls PTZ direction and speed, e.g. step size 8 is moved faster than step size 1.
Eight direction rotations: up, down, right, left, up-left, up-right, lower left, lower right.
Figure 5. 7 PTZ Control interface
59
User Manual of LaView Premium HD Digital Video Recorder
Index
1
Name
Border scan
Table 5. 3 Description of PTZ Control
Description
Operation: select the camera line scan of the left/right margin by direction button, and click the Settings button in the left /right
2
Preset margin position to determine the left border
Operation: modify preset position by direction button and inputting a preset number, then click “Add” to save
3
Tour
Operation: select “Tour”; Point between the first cruise line cruise input box value. And input numbers in “Path” and
“preset”. Click【Add Preset】to add one preset in the cruise path, and repeat to add additional presets. Click 【Clear Preset】to delete a preset, repeat to delete more
4
5
Pattern
AUX
Operation: Click “Pattern” in order to record an automated pattern. Then, go back to the PTZ controls in order to modify the zoom, focus and IRIS, etc. Stop recording in “Pattern” setting to save the pattern
On/off one of AUX
6 Wiper On/off wiper under protocol
5.1.6 Configuration
Access DVR local configuration menu by click “System Setting”, the further details please refer
【Local operation guide】
Figure 5. 8 Configuration interface
60
User Manual of LaView Premium HD Digital Video Recorder
5.1.7 Search Record
Click “Search record” to open the search interface, can search and operate record, alarm, motion, local record
Index Name
1
2
3
Search record
Play
Download
Figure 5. 9 Search Record interface
Table 5. 4 Description of PTZ Control
Description
By selecting the record type, start and end times, and click the check button, get a list of files on the DVR. Select the appropriate file and download can be played
Double click a search result to play in video window. Control the playing video by the control keys on the bottom. At this point, the bottom of the video window will display the video control buttons, video playback can be controlled select a searched video to download to local
The download speed and percentage are displayed on the bottom of the screen.
Figure 5. 10 Search interface
61
User Manual of LaView Premium HD Digital Video Recorder
5.1.8 Alarm Configuration
Click the 【Alarm】 to enter the alarm setup menu, users can set up and operate the alarm mode.
Figure 5. 11 Alarm configuration interface
Choose type of alarm on menu, monitor video loss, motion detection, disk full, disk error, video mask, external alarm.
Click 【Video Pop-up】, open the video loss, motion detection, hard disk full, hard disk failure, video block, video encoder alarm pop-up linkage.
Click 【prompt】open the prompt: When an alarm occurs in real-time monitoring will popup alarm window menu.
Click 【Sound Pop-up】, you can choose alarm tone pre-recorded on the local hard drive when an alarm occurs, tone file in WAV format.
5.1.9 About
Please refer to WEB controls related version information.
5.2 The Client Operations
Please refer to description of HiDView.
62