Vibrato. DigiTech RP255

Depth - Knob 3 adjusts the Depth of the modulation. Ranges from 0 to 99.

Regeneration - Knob 4 controls the regeneration of the effect. Ranges from 0 to 99.

Waveform (X-Edit TM only) - Selects a waveform: triang, Sine, or Square.

Level (X-Edit only) - Controls the level of the effect. Ranges from 0 to 99.

Vibrato (viBrat)

A Vibrato effect modulates the pitch of the incoming signal at an even rate.

Speed - Knob 2 adjusts the rate (Speed) at which the pitch modulates. Ranges from 0 to

99.

Depth - Knob 3 adjusts the intensity (Depth) of the modulating pitch. Ranges from 0 to

99.

Rotary Speaker (rOtArY)

Rotary Speaker is an emulation of a device that included a spinning horn and woofer. The rotation of these two speakers produced an interesting combination of the sound panning from side to side. This produced a slight pitch change due to the speed of the sound coming towards, and then going away from the listener.

Speed- Knob 2 adjusts the rate (Speed) of the spinning speakers. Ranges from 0 to 99.

Intensity - Knob 3 controls the intensity of the effect. Ranges from 0 to 99.

Doppler - Knob 4 controls the Pitch Shift effect that is the ratio between the horn and the rotor positions. Ranges from 0 to 99.

Crossover (X-Edit TM only)- Selects the crossover frequency between the horn and rotor.

Ranges from 0 (200 Hz) to 99 (1600 Hz).

29