VibroPan. DigiTech RP255

VibroPan (vibpan)

A vibrato is an effect that modulates the pitch of the incoming signal. This will take the whole signal slightly in and out of tune at a steady pace. The VibroPan also incorporates an automatic panner with the vibrato effect that creates a lush chorus-like sound.

Speed - Knob 2 adjusts how fast the signal is being modulated.

Depth - Knob 3 adjusts the amount of pitch change.

Vibrato/Pan- Knob 4 adjusts the amount of panning incorporated with the vibrato effect.

When the “Vib” control is at “0”, this effect is a standard vibrato. As the Level parameter is turned up, the phase difference of the vibrato signal sent to the two channels is changed until a full stereo image is obtained at “99”.

Waveform (X-Edit TM only) - Selects a waveform: triang, Sine, or Square.

Tremolo (trMoLO)

A Tremolo effect modulates the volume of the signal at an even rate.

Speed - Knob 2 adjusts the rate (Speed) at which the volume modulates. Ranges from 0 to

99.

Depth - Knob 3 adjusts the intensity (Depth) of the modulating volume. Ranges from 0 to

99.

Waveform - Knob 4 selects a waveform: triang, Sine, or Square.

30

Panner (PAnner)

An Auto Panner modulates the sound from left to right at an even rate.

Speed - Knob 2 adjusts the rate (Speed) at which the signal pans from side to side. Ranges from 0 to 99.