TECHNICAL DATA. Macrom sp 4050


Add to My manuals
30 Pages

advertisement

TECHNICAL DATA. Macrom sp 4050 | Manualzz

O/M SP 4.050 25/06/02 18:17 Page 10

TECHNICAL DATA

Power IHF 202

RMS Power at (12.5 Volts DC)

Front/Rear at 1 kHz < 0.08 % THD at 4 Ohm

Front/Rear at 1 kHz < 0.5 % THD at 2 Ohm

Front/Rear at 1 kHz < 0.5 % THD Mono at 4 Ohm

Dynamic Power at (14.4 Volts DC)

Front/Rear at 1 kHz < 0.08 % THD at 4 Ohm

Front/Rear at 1 kHz < 0.5 % THD at 2 Ohm

Front/Rear at 1 kHz < 0.5 % THD Mono at 4 Ohm

500 W

4 x 45 W

4 x 80 W

2 x 140 W

4 x 60 W

4 x 90 W

2 x 180 W

High pass, Front and Rear

Low pass, Front and Rear

Crossover slope

Response in frequency +/- 1 dB

Total harmonic distortion

Weighted IHF A Signal-Noise Ratio

Input sensitivity - Impedance

Loudspeaker impedances

Stereo

Mono

Power supply

Weight

Dimensions

(30-600)Hz

(30-600)Hz

12 dB/Octave

10 - 50.000 Hz

0.08%

> 90 dB

200-4000 mV/22 kOhm min. 2 Ohms min. 4 Ohms

14.4 V DC

(11 - 16 V permissible)

3,9 kgrs

212(i) x 65(h) x 355(d) mm

Due to the continual incorporation of improvements in this product, the characteristics and design may be subject to variation without prior notice.

10

advertisement

Related manuals