SHOW LOG DATA IN TABLE & GRAPHICAL FORM. Sulzer AquaProg 6


Add to my manuals
72 Pages

advertisement

SHOW LOG DATA IN TABLE & GRAPHICAL FORM. Sulzer AquaProg 6 | Manualzz

11.6 SHOW LOG DATA IN TABLE & GRAPHICAL FORM

Number of log channels will vary depending on controller connected!

The function is selected by clicking symbol below:

Or selecting “Collect log data” in the Connection menu.

First information about set log channels is collected from the substation.

Here AquaProg gets information about log interval, log type etc. for every log channel.

The operator selects which log channels are to be collected and which log blocks.

UP20/PCx stores all logged data for one day in one log block.

Log block zero has the information from today and log block 31 the information from 31 days back.

PCx store data from 99 days back and has 100 log blocks.

It is not certain that a log channel has the history for 32(100) days stores, i.e. stored log data for

31(99) days back. At short log intervals it can happen that several blocks are needed to store information for the same day. The history will then decrease.

Same thing happens if the operator changes the settings of a log channel.

CP 116 / CP 216, PC 242 and PC 441 can store data for up to 10 days.

Sulzer Pump Solutions AB

AquaProg user guide

2014-08-01

Page 56 of 72

Settings for each log channel can be checked by clicking button “Show inf.log channels”.

We return to previous picture by clicking Close.

Sulzer Pump Solutions AB

AquaProg user guide

2014-08-01

Page 57 of 72

Mark that log channel 1 and 2 shall be collected and blocks 0 – 4.

After collecting the following picture is shown.

Here can be selected which of the collected log channels are to be displayed, printed or saved to file

We select log channel 1 and 2.

As log interval for displaying we select 2013-03-12 to 2013-03-12

As time interval we chose 00:00:00 till 24:00:00 which means that we want to look at the whole day.

AquaProg can store log data in two different file formats: Ascii standard and Ascii Excel.

In format Ascii Exel a ; is used to separate the data fields and is and is used for importation to Excel.

Asscii standard is a tab-separated format and is used for printers.

Select format and click “Save file” if you want to save the file.

We select the button Show Table/Print.

Sulzer Pump Solutions AB

AquaProg user guide

2014-08-01

Page 58 of 72

Following picture will be shown

Max 6 log channels can be displayed simultaneously on the screen and max 4 can be printed simultaneously in the same document.

If we select the button Show Curve it can look like this

Sulzer Pump Solutions AB

AquaProg user guide

2014-08-01

Page 59 of 72

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

advertisement