CONTROL IDENTIFICATION, LOCATION, AND FUNCTION . Walker DSD56, MB

Add to my manuals
100 Pages

advertisement

CONTROL IDENTIFICATION, LOCATION, AND FUNCTION . Walker DSD56, MB | Manualzz

26

Operating Instructions

CONTROL IDENTIFICATION, LOCATION, AND

FUNCTION

  CAUTION

Before operating the mower, become familiar with the location and function of all operator controls. Knowing the location, function, and operation of these controls is important for safe and efficient operation of the mower.

Ignition Switch

The ignition switch is located on the right front of the body and is used to start and stop the engine. The switch has three positions: “O” is the OFF position,

RUN is the position the key returns to after starting, and “S” is the START position. When starting the engine, turn the key clockwise to the “S” position.

Do not hold the key in the “S” position longer than

10 seconds. If the engine does not start, return the key to the “O” position for at least 60 seconds before

Forward Speed

Control (FSC)

Blade Clutch

(PTO) making a restart attempt. Prolonged cranking can damage the starter motor and shorten battery life.

Release the key when the engine starts, and it will return to the RUN position. To stop the engine, rotate the key counterclockwise to the “O” position.

OFF ON

Ignition Switch

Parking Brake

Steering

Levers Choke

(Not Visible)

Throttle

START

Body

Latch

Ignition

Switch

Hourmeter

Operating Controls

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents