TRANSAXLE LOCKOUTS. Walker DSD56, MB

Add to My manuals
100 Pages

advertisement

TRANSAXLE LOCKOUTS. Walker DSD56, MB | Manualzz

34

Operating Instructions

TRANSAXLE LOCKOUTS

IMPORTANT: DO NOT TOW this mower with the transmission lockout engaged. Towing can produce excessive internal pressure and damage the transaxle.

To move the mower with the engine NOT running

(dead battery, maintenance, etc.), the transaxles are unlocked (released).

1. Raise the body.

2. Pull up the transaxle lockout rods on both the

RH and LH transaxles and secure into place by shouldering both rods in the chassis notch area.

3. The mower will “freewheel” with the rods in the

LOCKOUT position. The levers must be in the highest position to completely unlock the transmissions.

Hydro Lockout Rod

Hydro Lockout Rod

Hydro Lockout Rod - Normal Operating Position

RECOMMENDATIONS FOR MOWING

  DANGER

Do not mow around overhanging tree branches or bushes at the same height as the operator’s torso and head where inadvertent contact may cause injury.

Hydro Lockout Rod - Freewheel Position

4. After moving the mower, release the rods, placing them in the normal OPERATING position.

The transmission rod ends should be completely retracted against the chassis, otherwise operation of the transmission maybe erratic.

Avoid Low Hanging Branches

advertisement

Related manuals

advertisement

Table of contents