Prepare Cutout/Cabinet Opening. Whirlpool MKC2157AS, MKC2150AS, MKC2150AV, MKC2157AV, KMCC5015GBS, KMCC5015GSS


Add to my manuals
12 Pages

advertisement

Prepare Cutout/Cabinet Opening. Whirlpool MKC2157AS, MKC2150AS, MKC2150AV, MKC2157AV, KMCC5015GBS, KMCC5015GSS | Manualzz

3. Slide two tabs into the slots on the right side of the back of microwave oven.

Prepare Cutout/Cabinet Opening

1. On the cutout floor, find and mark the centerline.

2. Place the bottom duct in the opening, with the flange resting against the bottom front facing of the opening.

A B C

A B

A. Rear duct tabs

B. Slots

4. Use two short screws to secure top of rear duct to the back of microwave oven, as shown.

A B C D

A. Cutout floor

B. Centerline

C. Bottom duct

E

D. Bottom duct flange

E. Front facing

3. Align the center arrows on the bottom duct with the centerline drawn in Step 1 above.

A. Short screws (2)

B. Rear duct

C. Back of microwave oven

5. Use three short screws to secure back of rear duct to the back of microwave oven, as shown.

A B

A. Bottom duct

B. Center arrows, aligned with centerline

A B C

A. Short screws (3)

B. Rear duct

C. Back of microwave oven

4

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals