Switching on and off. Miele KWT 6112 iG ed-cs

Add to My manuals
64 Pages

advertisement

Switching on and off. Miele KWT 6112 iG ed-cs | Manualzz

Switching on and off

Before using for the first time

Packaging material

 Remove all packaging material from the inside of the appliance.

Protective foil

Stainless steel surfaces have a layer of protective foil to prevent scratching during transportation.

 Do not remove the foil until the wine conditioning unit has been positioned in its final location. Start at one of the top corners.

Cleaning

Please refer to the relevant instructions in "Cleaning and care".

 Clean the inside of the appliance and the accessories.

Operating the wine conditioning unit

A light touch of the finger on the sensors is all that is required to operate this wine conditioning unit.

A tone will sound each time a sensor is touched. You can deactivate this, if you wish (see "Selecting further settings -

Audible tones").

Switching on

When the wine conditioning unit is connected to the electrical supply, the mains connection symbol  will appear in the display after a short while.

 Touch the On/Off sensor.

The mains connection symbol  will go out and the wine conditioning unit will start to cool.

The first time the appliance is switched on the alarm symbol  will flash until the selected temperature has been reached.

The interior lighting will come on when the door is opened.

19

advertisement

Key Features

  • Precise temperature control (5 - 20°C)
  • Adjustable humidity levels (50 - 80%)
  • Innovative air purification system with Active AirClean filter
  • Elegant design with customizable features
  • Maximum storage capacity: 178 bottles
  • Door alarm and temperature alarm for added peace of mind
  • Feature lighting to showcase your wine collection

Related manuals

Frequently Answers and Questions

How do I adjust the temperature of the wine conditioning unit?
To set the temperature, press the plus or minus buttons on the control panel.
How do I turn on the DynaCool function?
To activate DynaCool, press the corresponding button on the control panel.
How do I clean the Active AirClean filter?
To replace the Active AirClean filter, remove the old filter and insert a new one.

advertisement

Table of contents