Before cleaning. Miele KWT 6112 iG ed-cs

Add to My manuals
64 Pages

advertisement

Before cleaning. Miele KWT 6112 iG ed-cs | Manualzz

Cleaning and care

Before cleaning

 Switch off the wine conditioning unit.

 Disconnect it from the mains.

 Take any wine bottles out of the wine conditioning unit and store them in a cool place.

 Take out all other removable parts for cleaning.

 Remove the magnetic strips from the wooden shelves before cleaning them

(see "Annotating wooden shelves").

Interior, appliance door and accessories

Clean the wine conditioning unit at least once a month.

Remove soiling immediately to prevent it from drying on.

 Clean the interior with a solution of lukewarm water and a little washingup liquid.

 The wooden shelves should only be wiped with a well wrung-out damp cloth. They must not be allowed to get wet.

 Use clean water only to wipe the magnetic strips at the front of the wooden shelves. Do not use a cleaning agent as this would damage the blackboard surface on the magnetic strips.

 After cleaning, wipe the interior and accessories with a damp cloth, and dry with a soft cloth. Leave the door open to air the appliance for a short while.

 Clean the appliance door with a proprietary glass cleaner.

The CleanSteel front has a high quality, special finish which is resistant to soiling and is very easy to clean.

 Do not use stainless steel cleaning agent to clean these surfaces. This will damage them.

Do not use Miele stainless steel conditioning agent on these surfaces. This will cause noticeable smearing.

Cleaning the ventilation gaps

A build-up of dust will increase the energy consumption of the appliance.

 The ventilation gaps should be cleaned on a regular basis with a brush or vacuum cleaner (e.g. use the dusting brush for Miele vacuum cleaners)

Cleaning the door seal

Do not use any grease or oil on the door seal as these will cause the seal to deteriorate and become porous over time.

 The door seal should be cleaned regularly with clean water, and then wiped dry with a soft cloth.

39

Cleaning and care

After cleaning

 Replace all shelves and accessories in the wine conditioning unit.

 Reconnect to the mains and switch the wine conditioning unit back on.

 Place the wine bottles back in the wine conditioning unit and close the door.

40

advertisement

Key Features

  • Precise temperature control (5 - 20°C)
  • Adjustable humidity levels (50 - 80%)
  • Innovative air purification system with Active AirClean filter
  • Elegant design with customizable features
  • Maximum storage capacity: 178 bottles
  • Door alarm and temperature alarm for added peace of mind
  • Feature lighting to showcase your wine collection

Related manuals

Frequently Answers and Questions

How do I adjust the temperature of the wine conditioning unit?
To set the temperature, press the plus or minus buttons on the control panel.
How do I turn on the DynaCool function?
To activate DynaCool, press the corresponding button on the control panel.
How do I clean the Active AirClean filter?
To replace the Active AirClean filter, remove the old filter and insert a new one.

advertisement

Table of contents