Information for dealers. Miele KWT 6112 iG ed-cs

Add to My manuals
64 Pages


Information for dealers. Miele KWT 6112 iG ed-cs | Manualzz

Information for dealers

Demo mode 

The wine conditioning unit can be demonstrated in the showroom or at exhibitions in "Demo mode". In this mode the control panel and interior lighting are active but the compressor remains switched off, so that the appliance does not cool down.

Switching on demo mode

 Leave your finger on the  sensor until the  symbol appears in the display.

 Then release the  sensor.

Demo mode is activated and the  symbol appears in the display.

Switching off Demo mode

The  symbol is lit up in the display.

 Switch the wine conditioning unit off by touching the On/Off sensor.

The temperature display will go out and the mains connection symbol  will appear.

 Touch the settings sensor.

All symbols available for selection will appear in the display and the  symbol flashes.

 Place your finger on the  sensor, and leave it there.

 Touch the sensors for setting the temperature ( or ) repeatedly until the  symbol flashes.

 At the same time, briefly touch the

On/Off sensor (without letting go of the  sensor).

 Touch the OK sensor to confirm your selection.

1 flashes in the display (means: Demo mode is switched on) and the  symbol lights up.


 Touch the  or  sensor until 0 appears (means: Demo mode is switched off).

 Touch the OK sensor to confirm your selection.

The selected setting is applied, the

 symbol flashes.

 Touch the settings sensor to leave settings mode.

Otherwise the appliance exits settings mode automatically after approximately one minute.

Demo mode is switched off, the  symbol goes out.

Information for dealers



Key Features

  • Precise temperature control (5 - 20°C)
  • Adjustable humidity levels (50 - 80%)
  • Innovative air purification system with Active AirClean filter
  • Elegant design with customizable features
  • Maximum storage capacity: 178 bottles
  • Door alarm and temperature alarm for added peace of mind
  • Feature lighting to showcase your wine collection

Related manuals

Frequently Answers and Questions

How do I adjust the temperature of the wine conditioning unit?
To set the temperature, press the plus or minus buttons on the control panel.
How do I turn on the DynaCool function?
To activate DynaCool, press the corresponding button on the control panel.
How do I clean the Active AirClean filter?
To replace the Active AirClean filter, remove the old filter and insert a new one.


Table of contents