Electrical connection. Miele KWT 6112 iG ed-cs

Add to My manuals
64 Pages

advertisement

Electrical connection. Miele KWT 6112 iG ed-cs | Manualzz

Electrical connection

The appliance is supplied with a mains cable with moulded plug for connection to a 50 Hz 220–240 V supply.

The fuse rating must be at least 10 A

(13 A in the UK).

All electrical work should be carried out by a suitably qualified and competent person in strict accordance with current local and national safety regulations (BS

7671 in the UK). Please ensure that the connection data quoted on the data plate match the household mains supply.

Connection should be made via a suitable switched socket which is easily accessible. It must not be located behind the appliance.

If the mains socket is not accessible after the appliance has been installed, a separator for each terminal must be present. There must be an all-pole contact gap of at least 3 mm in the switch

(including switch, fuses and relays according to EN 60335).

The plug and mains connection cable must not come into contact with the back of the appliance as vibrations can cause damage to these components.

This, in turn, could result in a short circuit.

Do not plug in other appliances behind this wine conditioning unit.

Do not connect the appliance to the mains electricity supply by an extension lead. Extension leads do not guarantee the required safety of the appliance

(e.g. danger of overheating).

Do not connect the appliance to an inverter such as those used with an autonomous energy source e.g. solar power. When switched on, peak loads in the system can cause the safety switch-off mechanism to be triggered.

This can damage the electronic unit.

The appliance must not be used with so-called energy-saving devices either. These reduce the amount of energy supplied to the appliance, causing it to overheat.

If the mains cable needs to be replaced this must be done by a suitably qualified person.

54

advertisement

Key Features

  • Precise temperature control (5 - 20°C)
  • Adjustable humidity levels (50 - 80%)
  • Innovative air purification system with Active AirClean filter
  • Elegant design with customizable features
  • Maximum storage capacity: 178 bottles
  • Door alarm and temperature alarm for added peace of mind
  • Feature lighting to showcase your wine collection

Related manuals

Frequently Answers and Questions

How do I adjust the temperature of the wine conditioning unit?
To set the temperature, press the plus or minus buttons on the control panel.
How do I turn on the DynaCool function?
To activate DynaCool, press the corresponding button on the control panel.
How do I clean the Active AirClean filter?
To replace the Active AirClean filter, remove the old filter and insert a new one.

advertisement

Table of contents