Assemble the Gate. Petsafe HBK19-11925

6

Step

4

Assemble the Gate

Gather (Quantity):

… (2) Gate Frame Rails

… (2) 65 inch (1.65 m) Tension Rods

… (8) Clips

… Chain Link Fabric

1. Insert swedged end into plain tube for both gate frame rails (4A).

2. Slip both tension rods down through the fi rst diamonds of the fabric on each side (4B).

3. On one side using 4 clips, connect the fabric to the gate frame by clipping the tension rod to the frame (4C).

4. On opposite side using 4 clips, connect fabric to frame by placing clip on tension rod fi rst and then clip onto frame by applying downward pressure (4E).

• Steel tubes may have sharp edges. Use care during fabric installation and installing clips as wire ends may be sharp.

• It is recommended that work gloves be worn.

5. Attach 2 tie wires to the bottom of the gate spaced evenly apart (4F). Attach 1 tie wire centred at the top (4D).

4A 4B 4D

4C

4F

4E

Swedged

End

U.S. Customer Care Center 1-888-632-4453