Condenser. GE Consumer & Industrial ZIC360NR, ZICS360NR

Add to My manuals
51 Pages

advertisement

Condenser. GE Consumer & Industrial ZIC360NR, ZICS360NR | Manualzz

Condenser

The condenser is located behind the grille panel at the top of the refrigerator and is made of steel tubing.

The outlet of the condenser is connected to a copper jumper tube that is connected to the inlet of the condenser loop. In a normal home environment, there is no need for routine condenser cleaning.

However, in environments that may be particularly dusty or greasy, the condenser should be cleaned periodically for efficient refrigeration operation. An ordinary appliance brush should be all that is needed.

Functionally, the condenser does the same job as previous models. Air is drawn through the condenser by the condenser fan from the front left and rear left of the machine compartment. Air exits only from the right side of the machine compartment.

Condenser Loop

The condenser loop, made of copper tubing, is foamed in place behind the breaker frame and across the mullion. It is not accessible for replacement. The tubing is routed from the machine compartment forward to the mullion, down to the freezer compartment, around the front perimeter of the freezer, and back into the machine compartment. The outlet of the condenser loop is connected to the dryer inlet.

COMPRESSOR

INVERTER*

CONDENSER

PROCESS TUBE

DRYER

SUCTION TUBE

CONDENSER LOOP

CAPILLARY

EVAPORATOR

– 37 –

advertisement

Related manuals