Model ABC-1161A NetSensor. Anemostat CTE-5202, ABC-1161, C24, ABC-1181, ABC-7001, ABC-7003, 8000, C23, STE-8000, STE-6000

model ABC-1161A

NetSensors

DESCRIPTION

An ABC-1161A NetSensor ® is a wall-mounted, temperaturesensing, programmable operator interface for use in a

Anemostat direct digital controls system. The NetSensor allows easy, direct communication with the connected controller via a local access port.

The NetSensor includes nine function keys, seven of which are programmable. The simple and functional design combined with its programmable functions allows for a wide variety of key assignments.

FEATURES

These NetSensors provide the following features:

• Large, four-character LCD display for easy temperature viewing, plus smaller characters for time.

• Setpoint and up/down arrow buttons accessible through cover. Six additional function buttons behind the flip-open cover.

• Seven buttons may be programmed with the controller to display or control the state of any pointinthe attached controller.

• Four-pin EIA-485 (formerly RS-485) data port on the underside for easy temporary computer connection to the controller.

MODELS

• ABC-1161A

ACCESSORIES

Almond

The following accessories and parts are available:

• HMO-1161

• HPO-1161

• HPO-0044

• ABC-5690

• ABC-5691

• ABC-5692

4 x 4 inch backplate, almond

Gasket

Replacement Allen screws (10)

25-foot plenum cable with connector

50-foot plenum cable with connector

75-foot plenum cable with connector direct digital controllers

Model ABC-1161A NetSensor

C

C-15

C

C-16 model ABC-1161A

NetSensors direct digital controllers

SPECIFICATIONS

Display

Temperature continuously updated on 0.38-inch, four-character, liquid crystal display. Time is simultaneously updated and displayed on a smaller display.

Temperature Sensor

Type Thermistor

Accuracy

Resistance

±0.36° F (±0.2° C)

10,000

Ω at 77° F (25° C)

Operating Range

Controller Connection

Connector type

Six-wire modular RJ-12 jack.

48 to 96° F (8.8 to 35.5° C)

Cable type and maximum length

Connect with cable not longer than 75 feet (22.9 meters) and conductors no smaller than #24 AWG. Anemostat plenum rated cable is recommended (see Accessories section).

Power

5 volts DC supplied from controller.

Environmental Limits

Operating 34 to 125° F (1.1 to 51.6° C)

Humidity 0 to 95% RH, non-condensing

Shipping

Weight

–40 to 140° F (–40 to 60° C)

2.8 ounces (80 grams).

Material

Light Almond ABS, UL Flame Class 94HB.

Mounting

Backplate mounts to 2 x 4 inch vertical standard handy-box. The

NetSensor is secured by two concealed Allen screws.

Modular RJ-12 Jack

A

B

C D

A B

3.25 in.

5.16 in.

83 mm

C

2.58 in.

116 mm 66 mm

D

3.25 in.

83 mm

E

0.87 in.

22 mm

ABC-1161 Buttons

E

EIA-485 Data Port