INTRODUCTION
WHAT YOU CAN DO WITH THIS PLAYER
Easy setting for language, resolution, screen aspect ratio
You can perform language and TV settings.
Play back commercially-released BD/DVD/CD/SA-CD/DVD-Audio discs
*
In addition to BD discs, this Player also supports playback of a variety of other discs.
\
\
Play back BONUSVIEW, BD-Live, etc.
*
You can enjoy additional movies on the latest BD discs.
\
Play back Video, Music, Photo files on a disc
*
This Player can play back discs you recorded.
\
Play back Video, Music, Photo files on a disc/USB memory device
* \
Files recorded on discs/USB memory devices can be played back with this Player.
Play back Video, Music, Photo files on a Home Network Server
* ** \
PC contents can be played back with TV or AV receiver by connecting this Player to a network server.
Operation with the remote control of TV, AV receiver, etc.
Connecting devices with an HDMI cable, you can control devices with a single remote control using the HDMI Control function.
\
* For details on playable disc and format, see page 3.
** Network setting is needed to use this function.
SUPPLIED PARTS
Make sure the following accessories are provided with the product.
Remote control Batteries (×2)
(AAA, R03, UM-4)
Audio pin cable Video pin cable Power cable
2
En
ABOUT DISCS AND FILES
■ Types of discs/files that can be
used with this Player
– 12 cm (5”) and 8 cm (3”) discs can be played back in this Player. Do not use an 8 cm (3”) to 12 cm (5”) adapter.
– Use discs that conform to compatible standards as indicated by the presence of official logos on the disc label. Playback of discs not complying with these standards is not guaranteed. In addition, the image quality or sound quality is not guaranteed even if the discs can be played back.
Disc Type
Recording
Format
BD-Video BD-ROM/BD-R/
BD-RE
DVD-ROM
DVD-R/DVD-R DL/
DVD-RW
DVD+R/DVD+R
DL/DVD+RW
CD-ROM
CD-R/CD-RW
DVD-Video/DVD-
Audio
DVD-Video/DVD-
VR/AVCHD/Data
Disc
DVD-Video/
DVD+VR/AVCHD/
Data Disc
CDDA/HDCD
CDDA/Data Disc
--
--
Data Format
DivX/WMV/MP3/
WAV/WMA/JPEG
DivX/WMV/MP3/
WAV/WMA/JPEG
SA-CD
USB
Network
SA-CD
--
--
--
DivX/WMV/MP3/
WAV/WMA/JPEG
--
DivX/WMV/MP3/
WAV/WMA/JPEG
WMV/MP3/WMA/
WAV/JPEG
Asia
Region management information
Destination BD-Video DVD-Video
Region code “A” or
“ALL”
Region number “3” or “ALL”
Taiwan
Korea
3 ALL
Region code “A” or
“ALL”
Region number “3” or “ALL”
3 ALL
Region code “A” or
“ALL”
Region number “3” or “ALL”
3 ALL
Region management information
Destination
Central and South
America
BD-Video
Region code “A” or
“ALL”
DVD-Video
Region number “4” or “ALL”
Europe
Russia
4 ALL
Region code “B” or
“ALL”
Region number “2” or “ALL”
2 ALL
Region code “C” or
“ALL”
Region number “5” or “ALL”
5 ALL
– BD/DVD Video players and discs have region codes, which dictate the regions in which a disc can be played.
– BD/DVD Video operations and functions may be different from the explanations in this manual and some operations may be prohibited due to disc manufacturer’s settings.
– If a menu screen or operating instructions are displayed during playback of a disc, follow the operating procedure displayed.
Notes
– Playback for some of the discs in the left side column tables may not be possible depending on the disc.
– Finalize all recording media that is played back in this Player.
– “Finalize” refers to a recorder processing a recorded disc so that it will play in other players/recorders as well as this Player. Only finalized discs will play back in this Player. (This Player does not have a function to finalize discs.)
– Playback of all files on the disc, USB memory device and network is not guaranteed.
– A copyright protected file cannot be played back via
USB memory device and network.
MP3/WMA/WAV audio file requirement
– Sampling frequency: within 32 - 48 kHz (MP3/
WMA), LPCM 44.1 kHz/16 bit/Stereo (WAV)
– Bitrate: within 8 - 320 kbps (MP3), 32 - 192 kbps
(WMA)
1
3
En
ABOUT DISCS AND FILES
■ Disc precautions
WMV file requirement
– WMV9, maximum resolution is 1,920 × 1,080.
About Super Audio CD (SA-CD)
– Audio format based upon the current CD standards but includes a greater amount of information that provides higher quality sound. There are three types of discs: single layer, dual layer and hybrid discs.
The hybrid disc can be played on existing CD players as well as Super Audio CD players since it contains both standard audio CD and Super Audio
CD information.
Super Audio CD disc type
Single layer disc
Dual layer disc Hybrid layer disc
HD layer HD layer CD layer
HD layer
Be careful of scratches and dust
– BD, DVD and CD discs are sensitive to dust, fingerprints and especially scratches. A scratched disc may not be able to be played back. Handle discs with care and store them in a safe place.
Proper disc storage
Place the disc in the center of the disc case and store the case and disc upright.
Avoid storing discs in locations subject to direct sunlight, close to heating appliances or in locations of high humidity.
Do not drop discs or subject them to strong vibrations or impacts.
Avoid storing discs in locations where there are large amounts of dust or moisture.
Hybrid Super Audio CD disc
1
CD layer that plays on any
CD player
High Density layer containing:
2 - High Quality DSD Stereo
3
- High Quality DSD Multi-channel
Hint
– This player supports DSD data transmission via
HDMI using a compatible AV receiver.
Note
– This unit does not show the text data included in the discs on the front panel display.
■ Loading a disc
– Insert the disc with the label face up.
– In case of the disc recorded on both sides, face down the side to play back.
Handling precautions
– If the surface is soiled, wipe gently with a soft, damp (water only) cloth. When wiping discs, always move the cloth from the center hole toward the outer edge.
– Do not use record cleaning sprays, benzene, thinner, static electricity prevention liquids or any other solvent.
– Do not touch the surface.
– Do not stick paper or adhesive labels to the disc.
– If the playing surface of a disc is soiled or scratched, the Player may decide that the disc is incompatible and eject the disc tray, or it may fail to play the disc correctly. Wipe any dirt off the playing surface with a soft cloth.
Cleaning the pick up lens
– Never use commercially available cleaning discs.
The use of these discs can damage the lens.
– Request the nearest service center approved by
Yamaha to clean the lens.
Notes
– Playback may begin automatically, depending on the disc and setting of this Player.
– The menu may be displayed first, depending on the disc.
– The disc load time may vary depending on the disc.
4
En
■ Front panel
CONTROLS AND FUNCTIONS
1 2 3 4
1 p (On/Standby)
2 USB port (p. 16)
3 SA-CD indicator: Lights up when an SA-CD is
loaded and the SA-CD layer (p. 4) is selected.
4 Front panel display
5 Disc tray (p. 4)
6 (Eject): Opens/closes the disc tray.
7 (Search backward/Skip backward):
Press to skip backward, and press and hold to search backward.
5 6 7 8 9 0 A B
8 (Search forward/Skip forward):
Press to skip forward, and press and hold to search forward.
9 (Play)
0 (Pause)
A (Stop)
B PURE DIRECT: Press to change the Pure Direct
mode (p. 7) to mode 1/mode 2/off. This button lights
up when Pure Direct mode is set to mode 1/mode 2.
Loading the batteries in the remote control
2
3
1
Approximate operating range of remote control
Remote control sensor
30˚ 30˚
6 m (20 ft)
Notes
– Do not subject the remote control unit to shock, water or excessive humidity.
– The remote control unit may not function if the
Player’s remote sensor is in direct sunlight or any other strong light.
– Incorrect use of batteries may cause them to leak or burst. Read the battery warnings and use the batteries properly.
– Do not mix old and new batteries, or mix different brands.
– Remove the batteries if you will not use the remote control unit for an extended period of time.
– Dispose of batteries according to your regional regulations.
5
En
1
CONTROLS AND FUNCTIONS
■ Remote control
Note
– will appear on the top left corner of the screen when the pressed button is not available.
1 Infrared signal transmitter: Outputs infrared signal. Aim this window to the remote control sensor
(p. 5).
a specified point of a movie. After Bookmark is set, to select the set point you want to jump to, press
DIGEST. You can set up to 12 Bookmarks.
3 : Opens/closes the disc tray.
4 PROGRAM Sets the order of playback
(p. 24). You can set up to 15 tracks (for an audio disc)
or titles/chapters (DVD-Video).
5 Color buttons BD on-screen instructions.
: Use these buttons according to
6 Number buttons: Enters numbers, or during playback, jumps to the track/chapter corresponding to the number you input. These buttons may not be available depending on the disc type and playback condition.
7 CLEAR: Clears entered number/set item.
8 SETUP: Displays SETUP menu screen (p. 26).
PIP Mark ( ) is displayed on the screen when this function is available. You can also select this item from
On Screen menu (p. 22).
Note
– PIP Mark is displayed only when the PIP Mark is set
to on (p. 30).
0 2ND AUDIO BD : Selects the secondary audio of
the Picture in Picture (p. 25) or audio commentaries.
The Secondary Audio Mark ( ) is displayed on the
screen when this function is available (p. 33). You can
also select this item from On Screen menu (p. 22).
Note
– Secondary Audio Mark is displayed only when
Secondary Audio Mark is set to on (p. 30).
6
En
A TOP MENU BD DVD : Displays the top menu
screen (p. 41) if the disc contains a menu. Select the
desired item using 5/a/2/3 and ENTER.
Note
– Specific operations may be different depending on the disc. Follow the instructions of each menu screen.
B Cursor buttons (5/a /2/3): Moves the focus in the menu screen.
ENTER: Selects the focused menu/item.
C RETURN: Returns to the previous menu or screen, etc.
D SUBTITLE :
languages (p. 41) if available . You can also select this
item from On Screen menu (p. 22).
E STATUS: Displays the playback information (p. 23).
F Control buttons
BD DVD CD VIDEO MUSIC PHOTO
/ : Searches backward/forward. The search speed will change each time you press the button
(search backward/forward: 5 steps each). Press to resume normal playback.
/ BD DVD CD VIDEO MUSIC :
Press and hold for instant search/replay. Instant search skips the content 30 seconds. Instant replay replays the content from 10 seconds before.
/ : Skips backward/forward.
: Stops playback. To stop playback completely, press this button twice.
: Pauses playback.
: Plays back contents.
( )/ ( )
BD DVD : Performs slow backward/forward. Slow playback speed will change each time you press the button (slow backward/forward: 4 steps each).
These buttons also perform frame advance/reverse playback during pause.
Press to resume normal playback.
Many DVD-Audio discs include slide show and page turn capabilities. Press / to move to a previous/ next page. This function is only for DVD-Audio.
Notes
– Some BD/DVD discs are not compatible with frame advance/reverse playback.
– Depending on the disc, this Player resumes playback from the point that where the Player was previously stopped. To play back from the beginning, press and then .
CONTROLS AND FUNCTIONS
G SA-CD/CD: Switches the playback layer of a hybrid
SA-CD between SA-CD and CD (p. 4).
1
Hint
– The SA-CD/CD indicator (p. 5) on the front panel
lights up when an SA-CD is loaded and the SA-CD
layer is selected (p. 33).
Notes
– Audio signals are only output from the AUDIO OUT
jacks (p. 11) while the SA-CD layer is selected.
– Audio signals recorded in DSD multi-channel format cannot be played on this Player.
H PURE DIRECT: Changes Pure Direct mode. Pure
Direct mode shown below will change each time you press the button. Pure Direct mode improves audio quality. PURE DIRECT on the front panel lights up when Pure Direct mode is set to mode 1/mode 2.
Mode 1: Front panel display is turned off, and video signals are not output. This mode is suitable listening audio.
Mode 2: Front panel display is turned off, and video signals from other than HDMI terminal are not output.
This mode is suitable for watching movies with high quality sound.
off: Normal play back.
I DIMMER: Changes brightness of the front panel display in 5 steps.
PHOTO
When thumbnails are displayed, you can proceed to the next/previous page with / .
DVD VIDEO
(p. 24).
K p: Turns this Player on or sets it to the standby mode.
L ZOOM :
The size of the screen will change each time you press the button (zoom in/out: 3 steps each).
Continued to the next page.
\
7
En
CONTROLS AND FUNCTIONS
M SEARCH :
Jumps to a specified point during playback. For details
on this function, refer to “Using search” (p. 24). You
can also select this item from status menu (p. 23).
N HOME: Displays the HOME menu screen (p. 19).
O REPEAT :
Changes repeat mode. Repeat mode shown below will change each time you press the button.
: Repeats the title being played back.
: Repeats the chapter being played back.
: Repeats all tracks/files on the disc/folder.
: Repeats the track/file being played back.
P A/B : a specific part you want to repeat.
1 Press A/B at the scene where you want to set the start point. “A-” is displayed on the screen.
2 Press A/B again at the scene where you want to set the end point. “A-B” is displayed on the screen.
Repeat playback starts.
3 To cancel the repeat playback, press A/B. “A-B” disappears and the repeat playback is finished.
Note
– This function cannot be performed depending on the specifications of the disc.
menu. The menu contents displayed vary depending on the disc. For details on how to see and operate the pop-up menu, refer to the manual for the disc.
The top menu screen may be displayed by pressing
POP-UP/MENU depending on the DVD.
R ON SCREEN: Displays On Screen menu (p. 22).
BD DVD video is recorded with multiple angles. The Angle
Mark ( ) is displayed on the screen when this function is available. You can also select this item
from On Screen menu (p. 22).
Note
– Angle Mark is displayed only when the Angle Mark
is set to on (p. 30).
BD DVD format. You can also select this item from On Screen
menu (p. 22).
8
En
ID function
You can change the remote control ID to prevent unwanted operation of the other Yamaha player such as
DVD player. If you have changed the remote control ID, make sure that you select the same ID for the main unit.
The default setting is ID1.
1 Remote control setting
To change the ID from ID1 to ID2, press and hold the red color button and 2 of number button simultaneously for 3 seconds. To change the ID from ID2 to ID1, press and hold the red color button and 1 of number button simultaneously for 3 seconds.
2 Main unit setting
Press and hold and on the front panel simultaneously for 2 seconds to display current ID when:
– No disc is inserted in this Player.
– The disc tray is closed.
– Playback is stopped.
– “NO DISC” is displayed on the front panel display.
Keep pressing and holding the keys for another 2 seconds to change the ID between ID1 and ID2.
Note
– If the remote control is without batteries for a few minutes or if exhausted batteries remain in the remote control, the remote control ID is automatically set to ID1. If you want to use the remote control in ID2 setting, install new batteries and set the remote control ID again.
CONTROLS AND FUNCTIONS
1
9
En
