advertisement
![Transporting. Farm King 960 | Manualzz Transporting. Farm King 960 | Manualzz](http://s3.manualzz.com/store/data/024453615_1-f24c72a98640578699e2b5fb13b5fea7-360x466.png)
Operation - 960
Transporting
Always comply with federal, state, local and provincial laws regarding the transport of farm equipment on pubic roadways.
WARNING
AVOID INJURY OR DEATH
• Disengage PTO for road travel.
• Keep PTO shields and all guards in place
• Keep bystanders away.
• Do not allow riders.
• Always use hazard flashers on the tractor when transporting unless prohibited by law.
• Always follow local regulations when transporting on public roadways. Check with your local authorities.
Verify that the tractor / tow vehicle is approved for transporting the equipment and that the equipment is securely attached to the tractor / tow vehicle.
Verify safety chain is installed and properly connected before transporting equipment.
Verify that the SMV (Slow Moving Vehicle) emblem, all lights and reflectors are clean and visible.
The ratio of the tractor / tow vehicle weight to the loaded equipment weight plays an important role in defining acceptable travel speed.
TRAVEL SPEED - Acceptable travel speed.
WEIGHT RATIO - Weight of fully equipped or loaded implement(s) relative to weight of tractor
/ tow vehicle.
Travel Speed
20 mph (32 kph)
10 mph (16 kph)
Weight Ratio
Less than 1 to 1
Less than 2 to 1
DO NOT TOW More than 2 to 1
IMPORTANT
Never exceed 20 mph (32 kph).
WARNING
Use of an unapproved hitch or tractor / tow vehicle can result in loss of control, leading to serious injury or death.
Tractor / tow vehicle and hitch must have the rated capacity to tow equipment.
37
Operation - 960
38
Service Schedule Chart
Lubrication
Chains And Fasteners
Safety Sign (Decal) Installation
Storage And Return To Service
Maintenance
Maintenance - 960
39
Maintenance - 960
40
advertisement
Related manuals
advertisement
Table of contents
- 5 Warranty Registration Form
- 7 Introduction
- 9 Owner’s Information
- 10 Equipment Identification
- 13 Safety
- 15 Safety Instructions
- 18 Fire Prevention
- 20 Safety Signs (Decals)
- 21 Equipment Decals And Signs
- 22 Safety Sign-Off Form
- 23 Assembly
- 25 Preparing For Assembly
- 26 PTO Shield
- 26 Cutting Edge (Option)
- 26 Hitch Assembly
- 27 Discharge Spout & Deflector
- 28 Hydraulic Spout Control
- 29 Operation
- 31 Pre - Operation Checklist
- 31 Entering The Operator’s Position
- 31 Leaving The Operator’s Position
- 31 Tractor Requirements
- 32 Connecting The Snowblower To Tractor
- 34 Connecting The PTO Driveline
- 38 Connecting Hydraulic Hoses
- 39 Adjusting Skid Shoe Height
- 40 Theory Of Operation
- 41 Transporting
- 43 Maintenance
- 45 Service Schedule Chart
- 46 Lubrication
- 48 Chains And Fasteners
- 49 Safety Sign (Decal) Installation
- 49 Storage And Return To Service
- 51 Parts Identification
- 53 Oil Bath Gearbox
- 54 Main Components
- 58 Cutting Edge (Option)
- 59 Hydraulic Spout Control
- 60 PTO Shaft
- 61 PTO Shaft Long
- 62 Hydraulic Spout Deflector Cylinder 1.75” x 5” (Option)
- 63 Specifications And Shipping Kit Numbers
- 65 Specifications
- 65 Shipping Kit And Bundle Numbers
- 66 Hardware Torque Values
- 69 Warranty
- 71 Farm King Base Limited Warranty
- 9 Owner’s Information
- 9 Serial Number Location
- 9 Manual Storage
- 10 Equipment Identification
- 10 Component Location - Front View
- 11 Component Location - Top View
- 15 Safety Instructions
- 15 Safe Operation is The Operator’s Responsibility
- 15 Safe Operation Needs A Qualified Operator
- 16 Use Safety Rules
- 16 Safety Rules For Power Take-Off (PTO) Driven Equipment
- 17 Machine Requirements And Capabilities
- 17 Transport Safety
- 18 Fire Prevention
- 18 Maintenance
- 18 Operation
- 18 Starting
- 18 Electrical
- 18 Hydraulic System
- 18 Fueling
- 19 Welding And Grinding
- 19 Fire Extinguishers
- 20 Safety Signs (Decals)
- 21 Equipment Decals And Signs
- 22 Safety Sign-Off Form
- 25 Preparing For Assembly
- 26 PTO Shield
- 26 Cutting Edge (Option)
- 26 Hitch Assembly
- 27 Discharge Spout & Deflector
- 27 Hydraulic Spout Deflector (Option)
- 28 Hydraulic Spout Control
- 31 Pre - Operation Checklist
- 31 Entering The Operator’s Position
- 31 Leaving The Operator’s Position
- 31 Tractor Requirements
- 32 Connecting The Snowblower To Tractor
- 33 Connecting The Snowblower Using A Quick Hitch
- 34 Connecting The PTO Driveline
- 35 PTO Driveline Length Check
- 35 PTO Driveline Bottoming Out Check
- 36 Reducing The PTO Driveline Length
- 37 PTO Driveline Engagement Check
- 38 Connecting Hydraulic Hoses
- 38 Disconnecting Hydraulic Hoses
- 39 Adjusting Skid Shoe Height
- 40 Theory Of Operation
- 41 Transporting
- 45 Service Schedule Chart
- 46 Lubrication
- 46 Recommendations
- 46 Locations
- 48 Oil Bath Gearbox
- 48 Chains And Fasteners
- 49 Safety Sign (Decal) Installation
- 49 Storage And Return To Service
- 49 Storage
- 50 Return To Service
- 53 Oil Bath Gearbox
- 54 Main Components
- 58 Cutting Edge (Option)
- 59 Hydraulic Spout Control
- 60 PTO Shaft
- 61 PTO Shaft Long
- 62 Hydraulic Spout Deflector Cylinder 1.75” x 5” (Option)
- 65 Specifications
- 65 Shipping Kit And Bundle Numbers
- 66 Hardware Torque Values
- 66 Metric Chart
- 67 Imperial Chart
- 71 Farm King Base Limited Warranty
- 71 Repair Parts Limited Warranty
- 71 What Is Not Covered
- 71 Authorized Dealer And Labor Costs
- 72 Warranty Requirements
- 72 EXCLUSIVE EFFECT OF WARRANTY AND LIMITATION OF LIABILITY