Standby mode. Nokia 6111

Below you will find brief information for mobile phone 6111. This mobile phone includes a camera, a radio, and many other features for making calls and accessing the Internet. You can send and receive text messages, multimedia messages, and e-mail messages. You can also download new content, such as themes, to your phone.

PDF Download

Document

■ Standby mode

When the phone is ready for use, and you have not entered any characters, the phone is in the standby mode.

Display

1 Signal strength of the cellular network at

your current location

2 Battery charge status

3 Indicators

4 Name of the network or the operator logo

5 Clock

6 Display area

7 Left selection key: Go to , or another function that you selected

8 Middle selection key is Menu

9 Right selection key: Names , or another function that you selected

To set the left and right selection key function, see

My shortcuts p.

76 . Operator

variants may have an operator-specific name to access an operator-specific Web site.

Active standby mode

In the standby mode, the main screen shows a list of selected phone features and information, that can be directly accessed: Short cut icons, audio functions, calendar and notes. Scroll up or down to activate the navigation in the list. Select

Select to start a feature or View to display information. Left and right arrows at the beginning and end of a line indicate that further information is available by scrolling left or right. To end the active standby navigation mode, press Exit .

To switch off the active standby mode select Options > Active standby > Off or

Menu > Settings > Display > Standby mode settings > Active standby > Off .

To organize and change the active standby mode, activate the navigation mode and select Options > Active standby > My active standby > Options and the following options:

Personalise — to assign or change phone features in the standby mode

Organise — to move the position of features in the standby mode

Enabling standby — select keys to enable the standby navigation mode

Personal shortcut list

To view the functions in the personal shortcut list, select Go to . To activate a function select it.

To view a list with available functions, select Go to > Options > Select options . To add a function to the shortcut list, select Mark . To remove a function from the list, select Unmark .

To rearrange the functions on your personal shortcut list, select Go to >

Options > Organise . Select the desired function, Move , and the place where you want to move the function.

Shortcuts in the standby mode

• To access the list of dialed numbers, press the call key once. Scroll to the number or name that you want; to call the number, press the call key.

• To open the web browser, press and hold 0.

• To call your voice mailbox, press and hold 1.

• Use the navigation key as a shortcut. See My shortcuts

Power saving

The power saving mode is activated, when no function of the phone has been used for a certain period of time. Only a small area of the display stays visible and moves down the display. To activate the power saver, see Power saver

in Display

. To deactivate the screen saver, open the slide, or press any key.