First Time Installation. Hitachi HDR10T01

First Time Installation

IMPORTANT: Ensure that the aerial is connected before switching on the set top box for the first time.

When the set top box is operated for the first time, installation wizard will guide you through the process.

First, TV Type selection on-screen menu will be displayed:

• To start installation process, select Yes by using

“ ”/“ ” buttons and then press the OK button.

• The box will start to search available stations. The progress bar will move along the line. You should allow the set top box to complete the search to store all available stations.

By pressing the “ ”/“ ” buttons select the Tv type you want to set and press OK button. Afterwards, “Select

HDMI resolution” OSD will appear on the screen.Select your desired resolution by pressing “ ”/“ ” button and press OK.

Note: You can press MENU button to cancel.

Changing Channels

• You can change channels with the following methods.

• You can press the numeric buttons (0–9) to directly enter the channel number. You can press numeric buttons consecutively to enter two or more digits.

• Press the P +/ P - buttons to move up or down to the next available channel.

Note: You can press OK button to display the channel list.

Adjusting the Volume

Volume Up / Down

• You can increase or decrease the volume by using

V+ / V- buttons.

Then “Do you want to start an automatic channel scan?” pop-up menu is displayed. Auto search can be started by selecting the “Yes” button. The box will automatically find the channels and store them.

• The volume level selected will remain set, even when the receiver is turned off and on again, until you change volume again.

• The audio volume adjustment for the receiver is independent of the volume control on your TV set.

IMPORTANT: You should be careful that both volume controls are kept within reasonable levels so that when switching on, or when first turning on your TV set, the sound level is not too high.

Mute

• You can press to mute the sound of your set top box. The sound will be muted once this button is pressed.

- 11 -