INSTALLATION. Hitachi HDR10T01

About

Select About and press OK button to display system information.

Audio Description

This function enables or disables the audio description feature by pressing the “ ” or “ ” buttons. Audio description refers to an additional narration track for blind and visually impaired viewers of visual media, including television and movies. The description narrator talks through the presentation, describing what is happening on the screen during the natural pauses in the audio (and sometimes during dialogue, if deemed necessary).You can use this feature, only if the broadcaster supports this feature.

Available Langs.

You can see available language in this section.

Preferred Language (Optional)

By pressing the “ ” or “ ” buttons the preferred audio description language is being changed.

This setting can be used, only if it is available.

Relative Volume (Optional)

Using this option, the Audio Description volume level can be increased or decreased relatively, according to the general volume.

Language

• You can operate the TV’s language settings using this menu.

• Select Language from Setup menu and press OK to continue.

Menu: shows the language of the system.

Preferred

These settings will be used if available. Otherwise current settings will be used.

• Audio: Sets the preferred audio language.

• Subtitle: Sets the subtitle language. Selected language will be seen in subtitles.

• Guide: Sets guide language.

Current (*)

(*) These settings can be changed if only the broadcaster supports. Otherwise, settings will not be available to be changed.

• Audio: Changes the audio language for the current channel.

• Subtitle: Sets the subtitle language for the current channel.

INSTALLATION

• Installation menu will help you to retune your set top box in order to store new services or stations.

• Select Installation from Setup menu by using “ ” or

“ ” buttons and press OK to continue.

• Installation menu includes the following items:

Automatic Channel Scan / Retune

• Select Automatic Channel Scan / Retune by using

“ ” or “ ” button and press OK button.

• Then the following message will be displayed on the screen:

- 21 -