Digital Teletext (** for UK only). Hitachi HDR10T01

Internet Portal

You can access internet portal using your set-top box.

To do this, an active internet connection is required.

After the connection is established, you can select

“Internet Portal” option from the main menu to activate the portal. You can access several applications using this portal.

Use navigation buttons to do selections.

• When such a channel is selected, it will usually display the opening page of information automatically, after a short break.

• Some channels mostly have digital teletext pages broadcast along with the television programme.

OSD Warning Messages

No Signal

• When the box receives no signal (e.g. the antenna cable is disconnected), “ NO DIGITAL SIGNAL

AVAILABLE” message will be displayed on the screen.

Digital Teletext (** for UK only)

• Press the TEXT button.

• The digital teletext information appears.

• Operate it with the coloured buttons, cursor buttons and OK button.

The operation method may differ depending on the contents of the digital teletext.

Follow the instructions displayed on digital teletext screen.

• When Press “ OK” button or similar message appears on the screen, press the OK button.

• When the TEXT button is pressed, the TV returns to television broadcasting.

• With digital terrestrial broadcasting (DVB-T), in addition to digital teletext broadcasting together with the normal broadcasting, there are also channels with just digital teletext broadcasting.

• The aspect ratio (picture shape) when watching a channel with just digital teletext broadcasting is the same as the aspect ratio of the picture viewed previously.

• When you press the TEXT button again, the digital teletext screen will be displayed.

• Many digital terrestrial television channels broadcast pages of information on the programmes, the weather, news and other topics.

• This digital teletext can be displayed by your set top box. Indeed, some channels broadcast teletext information entirely.

No Channels Have Been Added Yet

• When there are no channels stored in the box,

Channel List menu will not be displayed and channel navigation will not be available.

• In such cases, the following error message will be displayed.

- 23 -

Troubleshooting

Problem Possible Reasons What To Do

No picture or sound.

No signal or weak signal.

Check the aerial and video connections (scart).

Changes in the settings have not taken effect.

The set top box was unplugged without first switching to standby mode.

Make sure that the box is in standby mode before unplugging it from the mains.

The remote control is not working.

• The set top box is in standby.

• Remote control is out of range.

• Batteries are exhausted.

• Press the STANDBY button.

• Check that the remote control range is clear.

• Replace the batteries with new ones.

- 24 -