Report working time
About reporting working time
You can report the time that you start and finish work, as well as the time you spend having breaks.
Note: You can either report working time
or keep a logbook depending on the configuration in
WEBFLEET.
To report working hours, you must first set your driver name .
Driver identification
To generate personalised work time reports, you need to identify yourself by entering your PIN code.
Note: Using WEBFLEET, the office can select that you have to enter your PIN code each time you switch on your TomTom PRO 82xx.
1. Tap the Main Menu button.
2. Tap the Working times button.
3. Tap Change driver.
4. Select your name from the driver list by tapping it.
5. Enter your four digit PIN code provided by your WEBFLEET administrator, then tap the arrow button.
Your PIN code is now stored and used for all reports until you change it.
How to report working time
To report the times you spend working to WEBFLEET, do the following:
1. Tap the Main Menu button, then tap Working Times.
Alternatively, you can tap the button showing the currently selected working state in the
WEBFLEET panel on the left in the map or guidance view.
2. Tap the appropriate button to change your work status .
96
