Zone Status Browser
Access the User Menu.
Press COMMAND until
ZONE STATUS appears.
ZONE STATUS?
Press any SELECT key/area then SELECT
NBR.
ARM BYPS ALR NBR
Press one of the left two
SELECT keys/areas to browse through the programmed zone names.
ZONE NO: -
Appendix B
SELECT AREA . . .
CMD
This prompt allows you to search for a zone by area. Press the
COMMAND key to scroll through the list of areas.
Appendix B
FRONT OFFICE
CMD
When the area where the zone is located displays, press any
SELECT key/area.
SELECT ZONE . . .
24 HOUR ZONES
CMD
After all the areas display, the system allows you to search through the 24 hour zones
(Fire, Panic, Supervisory, etc.)
SELECT ZONE . . .
Press the COMMAND key to scroll through the zone names list.
CMD CMD
When the correct zone name displays, press any SELECT key/area.
EAST DOOR
Verify the zone number matches the previously shown name.
ZONE NO : 0 1 2
Press COMMAND.
CMD
HALL SMOKE
ZONE NO : 0 3 4
Press COMMAND.
CMD
When the correct zone name displays, press any SELECT key/area.
Verify the zone number matches the previously shown name.
The system displays one of these zone status messages:
-OKAY = the zone is normal
-BYPAS = the zone is bypassed
-BAD O = the zone is open
-BAD S = the zone is shorted
EAST DOOR -OKAY
CMD
HALL SMOKE -OKAY
Press COMMAND to enter another zone number.
CMD
The system displays one of these zone status messages:
-OKAY = the zone is normal
-BYPAS = the zone is bypassed
-BAD O = the zone is open
-BAD S = the zone is shorted
XR500/XR100 Canadian User’s Guide 55
Bypass Zones Browser
Access the User Menu.
Press COMMAND to display BYPASS ZONES.
Press any SELECT key/area.
BYPASS ZONES?
Press either of the two left SELECT keys/areas.
ZONE: - RST BYP
This prompt allows you to search for a zone by area.
SELECT AREA . . .
Press the COMMAND key to scroll through the list of areas.
CMD
When the area where the zone is located displays, press any SELECT key/area.
FRONT OFFICE
SELECT ZONE . . .
Press the COMMAND key to scroll through the zone names list.
CMD
EAST DOOR When the correct zone name displays, press any SELECT key/area.
The display shows the zone number. SELECT RST to
Reset the zone. SELECT
BYP to Bypass the zone.
ZONE:012 RST BYP
ZONE: - RST BYP
The display returns to the ZONE: prompt allowing you to enter another zone number.
Zone Monitor Browser
ZONE MONITOR?
Access the User Menu. Press
COMMAND until ZONE MONITOR?
displays. Press any SELECT key/area.
ALL NBR SELECT NBR .
ZONE: - ADD RMV Press either of the two left
SELECT keys/areas.
SELECT AREA . . .
This prompt allows you to search for a zone by area. Press the COMMAND key to scroll through the list of areas.
CMD
FRONT OFFICE
When the area where the zone is located displays, press any SELECT key/area.
SELECT ZONE . . .
CMD
Press the COMMAND key to scroll through the zone names list.
EAST DOOR
When the correct zone name displays, press any SELECT key/area.
The display shows the zone number.
ZONE:012 ADD RMV
Selecting ADD places the zone in monitor mode.
Selecting RMV removes the zone from monitor mode.
56 XR500/XR100 Canadian User’s Guide Appendix B
Add User Codes Browser
USER CODES?
Access the User Menu. Press
COMMAND until USER CODES? displays.
SELECT ADD.
ADD DEL CHG
USER NUMBER:
-
Enter a new user number .
Enter a new user number.
USER NUMBER: 12
1 2 3 4
Press COMMAND.
CMD
CODE NO: -
1 2 3 4
At this prompt, you can enter a new user number or scroll through the available user numbers.
View available user numbers .
Press any SELECT key/area.
USER NUMBER: 012
The first available user number displays.
CMD
Press
COMMAND.
Enter the new user code.
CODE NO: 1 2 3 4
CMD
Verify the number and press
COMMAND.
USER 012
-
The default user name appears.
Press any SELECT key/area to clear this name.
See the Entering User Names diagram in Appendix B.
Change User Codes Browser
USER CODES?
Access the User Menu. Press
COMMAND until USER CODES?
displays.
SELECT CHG.
ADD DEL CHG
USER NUMBER:
-
At this prompt, you can enter a user number or scroll through the list of user names
Enter a user number
USER NUMBER: 12
.
View current user names .
Press any SELECT key/area.
MIKE JONES
The first available user name displays.
CMD
Press COMMAND.
1 2 3
Press COMMAND.
4
CMD
CODE NO: * * * * *
Press any SELECT key/area to clear the present code.
CODE NO:
1 2 3 4
Enter a new code
CMD and press COMMAND.
KATIE SMITH
KATIE SMITH The next available user name displays.
USER NUMBER: 013
If this is the user you want to change, press any SELECT key/area.
Verify the user number.
CMD Press COMMAND.
Follow the prompts to complete the code change.
You can also press any SELECT key/area here to clear a custom user name and use the data entry keys to enter a new user name.
Appendix B XR500/XR100 Canadian User’s Guide 57
Delete User Codes Browser
USER CODES?
SELECT DEL.
ADD DEL CHG
Access the User Menu. Press the
COMMAND key until USER CODES? displays.
Enter a user number.
USER NUMBER: 13
1 2 3
Press
COMMAND.
4
CMD
USER 13 DELETED
-
USER NUMBER:
At this prompt, you can enter a user number or scroll through the list of user names.
View current user names.
Press any SELECT key/area.
MIKE JONES
The first available user name displays.
CMD
Press COMMAND.
KATIE SMITH The next available user name displays.
USER NUMBER: 013
If this is the user you want to delete, press any SELECT key/area.
Verify the user number.
CMD Press COMMAND.
USER 13 DELETED
Add User Profiles Browser
USER PROFILES?
Access the User Menu.
Press COMMAND until
USER PROFILES displays
SELECT ADD.
ADD DEL CHG
-
PROFILE NO: -
At this prompt, you can enter a new profile number or scroll through the available (unused) profile numbers.
Enter a new profile number.
USER NUMBER: 12
1 2 3 4
View available profile numbers
Press any SELECT key/area.
PROFILE NO: 012
The first available profile number displays.
Follow the prompts to select all profile options and press
COMMAND when finished.
CMD
PROFILE 012 ADDED
58 XR500/XR100 Canadian User’s Guide Appendix B
Change User Profiles Browser
USER PROFILES?
SELECT CHG.
ADD DEL CHG
Access the User Menu. Press COMMAND until PROFILES? displays. Press any
Select key/area.
-
PROFILE NO:
At this prompt, you can enter a profile number or scroll through the list of profile names.
PROFILE NO: 12
Press any SELECT key/area.
SELECT PROFILE . . .
1 2 3 4
–
SHIPPING
Follow the prompts to complete the profile change.
CMD
CMD
Press COMMAND.
SHIPPING
You can also press any Select key/area to clear the profile name and use the data entry keys to enter a new name.
PROFILE NO: 012
CMD
Press COMMAND.
The first profile name displays. To scroll through the list press the COMMAND key.
If this is the profile you want to change, press any Select key/area.
Verify the profile number.
CMD Press COMMAND.
PROFILE 12 CHNGD
When you complete changes to the profile, press COMMAND.
Delete User Profiles Browser
USER PROFILES?
Access the User Menu. Press the COMMAND key until USER
PROFILES? displays.
SELECT DEL.
ADD DEL CHG
PROFILE NO: -
-
At this prompt, you can enter a user number or scroll through the list of user names.
PROFILE NO: 12
1 2 3
Press
COMMAND.
4
CMD
Press any SELECT key/area.
SELECT PROFILE . . .
To scroll through the list of profiles press
CMD the COMMAND key.
The next used profile name displays.
ENGINEERING When you scroll to the profile you want to delete, press any
Select key/area.
PROFILE NO: 012
Verify the profile number.
CMD Press the COMMAND key to delete the profile.
PROFILE 12 DELTD
Appendix B XR500/XR100 Canadian User’s Guide 59
Output Groups Browser
OUTPUT GROUP: -
Access OUTPUT GROUP: - in the USER
PROFILES? menu. Press any Select key/area.
Outputs On/Off Browser
OUTPUTS ON/OFF?
OUTPUTS DOOR
Access the User Menu. Press the COMMAND key to display OUTPUTS ON/OFF?. Press the
Select key/area under OUTPUTS or DOOR.
SELECT GROUP . . .
At this prompt you can scroll through the list of output group names. OUTPUT: - ON OFF
DOOR: - ON OFF
Press either of the two left SELECT keys/areas.
COMMAND
OUTSIDE DOORS. . .
Press COMMAND.
The first output group name displays.
WINDOWS . . .
COMMAND
Press COMMAND.
The next output group name displays.
SELECT OUTPUT . . .
SELECT DOOR . . .
This prompt allows you to search for a door or an output. Press the COMMAND key to scroll through the list of doors or output names.
CMD
OFFICE FRONT DR
When the door or output you want displays, press any Select key/area.
OUTPUT: 127 ON OFF
DOOR: 128 ON OFF
The display shows the door or output number.
FRONT OFFICE
Press any Select key/area and the output group number displays.
60 XR500/XR100 Canadian User’s Guide Appendix B
