Disposal. Aeg-Electrolux SK48840-7I

Disposal

Appliance Packaging Information

The materials marked with the symbol are recyclable.

>PE< for polyethylene, e.g. sheet wrapping material

>PS< for polystyrene, e.g. padding material (always CFC-free)

>POM< polyoxymethylene, e.g. plastic clips.

All materials are environmentally sound!

Safety precautions for isobutane

Warning

The refrigerant of the appliance is isobutane (R 600a) that is inflammable and explosive to a greater extent.

Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.

Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.

Do not damage the refrigerant circuit.

Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.

27

28

Use and Control

Before Use

Wait two hours before connecting the appliance to allow the oil to flow back in the compressor.

Before using the appliance for the first time, wash the interior and all internal accessories with lukewarm water and some neutral soap so as to remove the typical smell of a brand-new product, then dry thoroughly.

Do not use detergents or abrasive powders, as these will damage the finish.

Remove safety elements used for transportation.

Starting the appliance

Insert the plug into the wall socket and turn the thermostat knob clockwise beyond position «O» (OFF).

The thermostat control situated inside the fridge compartment regulates the temperature of the appliance.

Turn the thermostat control to the required setting.

Temperature Control

The following effects are of significance in respect of the interior temperature:

Ambient temperature

Quantity and temperature of the food stored;

Frequency with which the door is opened and how long it is left open the location of the appliance.

The temperature inside the appliance is automatically adjusted.

Setting “1” = hightest temperature, warmest setting

Setting “6” = lowest temperature, coldest setting.

Setting “ ” = Off

A medium setting is generally the most suitable.