3.2 Temperature Settings Warnings. Frigidaire FFR32GFELT, FFR32GFEMT, FFR32GFERT

If Super Switch is available:

• Set this switch to the ‘ ‘ position, except when the ambient temperature is below 16°C, such as in winter, or when the freezer temperature needs to be maintained at a lower value. In this case, turn the switch to ‘ ‘ position ON.

• Press the switch on the thermostat box to position

‘ ’ to set the super switch

ON. The switch will illuminate.

• When the freezer compartment has cooled to a sufficient temperature, or in warm weather, turn the super switch off to save on electrical consumption.

• When you first switch on the appliance, allow it to operate continuously for

24 hours in order to reach operating temperature.

• During this time, do not open the door frequently or place a large quantity of food inside the appliance.

If the unit is switched off or unplugged, you must allow at least 5 minutes before restarting or plugging in the unit in order to prevent damage to the compressor.

3.2 Temperature Settings Warnings

• The ambient temperature, temperature of the freshly stored food and how often the door is opened affects the temperature in the refrigerator compartment. If required, change the temperature setting.

• It is not recommended that you operate your fridge in environments colder than

10°C in terms of its efficiency.

• When setting the thermostat, take into consideration how often the appliance doors are opened and closed, how much food is stored in the refrigerator, and the environment in which the refrigerator is located.

• When the appliance is first switched on, allow it to run for 24 hours in order to reach operating temperature. During this time, do not open the door and do not keep a large quantity of food inside.

• Unplug your appliance during a power cut to prevent damage to the compressor.

Once power is restored, delay plugging in your appliance for 5 to 10 minutes.

This will help prevent damage to the appliance's components.

• Your appliance is designed to operate in the ambient temperature ranges stated in the standards, according to the climate class stated in the information label. It is not recommended that your fridge is operated in the environments which are outside of the stated temperature ranges.

This will reduce the cooling efficiency of the appliance.

• Your appliance is designed to operate in the ambient temperature (ST/N = 16°C

- 38°C) intervals stated in the standards, according to the climate class displayed on the information label. We do not recommend operating your appliance out of the stated temperature limits in terms of cooling effectiveness.

Climate

Class

T

ST

N

SN

Ambient Temperature o C

Between 16 and 43 (°C)

Between 16 and 38 (°C)

Between 16 and 32 (°C)

Between 10 and 32 (°C)

3.3 Temperature indicator

In order to help you better set your refrigerator, we have equipped it with a temperature indicator located in the coldest area.

To better store the food in your refrigerator, especially in the coldest area, make sure the message “OK” appears on the

OK temperature indicator. If « OK » does not appear, this means temperature has not been set properly

EN - 29