advertisement
Chapter 04
Using MDC
Multiple display control "MDC" is an application that allows you to easily control multiple display devices simultaneously using a PC.
For details on how to use the MDC program, refer to Help after installing the program. The MDC program is available on the website.
MDC Program Installation/Uninstallation
Installation
―
MDC installation can be affected by the graphics card, mother board and network conditions.
1
Click the MDC Unified installation program.
2
Select a language for installation. Next, click " OK ".
3
When the " Welcome to the InstallShield Wizard for MDC_Unified " screen appears, click
" Next ".
4
In the " License Agreement " window displayed, select " I accept the terms in the license agreement " and click " Next ".
5
In the displayed " Customer Information " window, fill out all the information fields and click " Next ".
6
In the displayed " Destination Folder " window, select the directory path you want to install the program in and click " Next ".
―
If the directory path is not specified, the program will be installed in the default directory path.
7
In the displayed " Ready to Install the Program " window, check the directory path to install the program in and click " Install ".
8
Installation progress will be displayed.
9
Click " Finish " in the displayed " InstallShield Wizard Complete " window.
―
Select " Launch MDC Unified " and click " Finish " to run the MDC program immediately.
10
The MDC Unified shortcut icon will be created on the desktop after installation.
―
The MDC execution icon may not be displayed depending on the PC system or product specifications.
―
Press F5 if the execution icon is not displayed.
Uninstallation
1
Select Settings > Control Panel on the Start menu and double-click Add/Delete Program .
2
Select MDC Unified from the list and click Change/Remove .
50
Connecting to MDC
Using MDC via Ethernet
Enter the IP for the primary display device and connect the device to the PC. Display devices can be connected to each other using a LAN cable.
Connection using a direct LAN cable
―
Multiple products can be connected using the RJ45 port on the product and the LAN ports on the HUB.
RJ45
HUB
Computer
Monitor 1
Monitor 2
51
advertisement