advertisement
J-200
17.0 Optional BLUEWAVE® Spa Stereo System
To start enjoying your new stereo receiver, please read the following operation instructions in their entirety.
3.5 mm cable
30-pin
Connector
2
6 7
1
AUX
USB
3 4
5
USB connector
1. Media Locker Handle
Slide the handle to lock and unlock the protective door.
2. Power Button
Press power button once to turn “ON” stereo system. Press a second time to place the stereo in “Standby” mode and the red light will remain illuminated.
3. Auxiliary Input Jack Connector
Allows you to connect an auxiliary device by using a 3.5 mm cable.
4. Universal Serial Bus (USB) Device Connector
Allows you to connect your device via a USB port and a USB cable compatible with your device.
5. Auxiliary Device Holding Base
The removable base securely holds the Auxiliary device, such as an iPod®/MP3/iPhone, in place. It can be removed for larger devices.
6. 3.5 mm Cable (purchased separately)
Use this cable to connect your Auxiliary or MP3 device to the stereo via the “AUX” connection.
7. Apple 30-pin to USB Cable (purchased separately)
Use this cable to connect your compatible iPod, iPhone or MP3 device to the stereo via the “USB” connection.
52
advertisement
