17.5 Wireless Remote Battery Replacement Procedure. Jacuzzi (2014) J-200™

17.5 Wireless Remote Battery Replacement Procedure

J-200

1. Turn the remote unit over and locate the battery door

(Figure A).

Battery

Door

OPEN CLOSED

CR

24

3V

30

2. Rotate the battery door, with a coin, counterclockwise to the Open position (Figure B). When the door is unlocked it will pop up slightly.

OPEN

Fig. A

CLOSED

Fig. B

3. Remove battery door by lifting the door upward (Figure C).

OPEN CLOSED

4. Replace battery using CR2430 or equivalent (Figure D).

OPEN

Fig. C

CLOSED

CR2430

3V

Fig. D

5. Reinstall the battery cover, using the coin rotate the door to the Close position (Figure E).

OPEN CLOSED

CR

243

3V

0

Note: Remote unit is water resistant not waterproof. Although it is Fig. E designed for use while in the spa, it should never be left in the spa while the cover is on and spa is not in use. The remote should be stored in a dry location such as the stereo remote pouch (if applicable) located on the outside of the spa cover or within your home. Extreme weather can affect the remote control battery. In extreme hot or cold environments store the remote control indoors to prolong battery life.

17.6 Bluewave Spa Stereo System Specifications

Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10.7-14.4V DC

Tuner

FM radio sensitivity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8uV

FM radio reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Stereo

59