advertisement
SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
V Volts
NAME
Voltage
DESIGNATION/EXPLANATION min Minutes
Direct Current
Time
Type or a characteristic of current no
No Load Speed Rotational speed, at no load
.../min Per Minute Revolutions, strokes, surface speed, orbits etc., per minute
FEATURES
PRODUCT SPECIFICATIONS
Motor .....................................................................................................................................................................40 Volts DC
Air Velocity
MPH ................................................................................................................................................................................110
CFM ................................................................................................................................................................................480
KNOW YOUR BLOWER
See Figure 1.
The safe use of this product requires an understanding of the information on the tool and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules.
BLOWER TUBE
The blower tube can be installed on the blower without using any tools.
OVERMOLD HANDLE
Ergonomic handle with overmold improves comfort and grip.
TURBO BOOST
The turbo boost feature temporarily increases air flow to maximum velocity.
6 — English
advertisement
Related manuals
advertisement
Table of contents
- 5 Introduction
- 6 Important Safety Instructions
- 9 Features
- 9 Assembly
- 10 Operation
- 12 Maintenance
- 12 Troubleshooting
- 13 Warranty
- 35 Introduction
- 36 General Safety Rules
- 36 Specific Safety Rules
- 37 Symbols
- 38 Features
- 38 Assembly
- 39 Operation
- 41 Maintenance
- 42 Troubleshooting
- 43 Warranty
- 65 Introduction
- 66 Safety Instructions
- 68 Symbols
- 69 Features
- 70 Assembly
- 71 Operation
- 72 Maintenance
- 73 Warranty