advertisement
OPERATION
To install: WARNING:
Do not allow familiarity with products to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury.
on the battery pack with groove in the blower’s battery port.
WARNING:
Always wear eye protection with side shields marked to comply with ANSI Z87.1, along with hearing protection.
Failure to do so could result in objects being thrown into your eyes resulting in possible serious injury.
WARNING:
Make sure the latch on the bottom of the battery pack snaps in place and the battery pack is fully seated and secure in the blower battery port before beginning operation. Failure to securely seat the battery pack could cause the battery pack to fall out, resulting in serious personal injury.
WARNING:
Do not use any attachments or accessories not recommended by the manufacturer of this product. The use of attachments or accessories not recommended can result in serious personal injury.
APPLICATIONS
You may use this product for the purposes listed below:
NOTICE:
When placing battery pack in the tool, be sure raised rib on battery pack aligns with the bottom of the tool and latches into place properly. Improper installation of the battery pack can cause damage to internal components.
To remove:
depress to release the battery pack from the blower.
leaves, pine needles, and other debris
This product will accept Ryobi 40 V lithium-ion battery packs.
For complete charging instructions, refer to the Operator’s
Manuals for your Ryobi battery pack and charger models.
BATTERY PROTECTION FEATURES
Ryobi lithium-ion batteries are designed with features that protect the lithium-ion cells and maximize battery life.
If the tool stops during use, release the trigger to reset and resume operation. If the tool still does not work, the battery needs to be recharged.
TO INSTALL/REMOVE BATTERY PACK
See Figure 3.
WARNING:
Always remove battery pack from your tool when you are assembling parts, making adjustments, cleaning, or when not in use. Removing battery pack will prevent accidental starting that could cause serious personal injury.
WARNING:
Battery tools are always in operating condition. Therefore, switch should always be in the OFF position when not in use or carrying at your side. Remove battery pack when transporting or carrying blower to avoid accidental starting, which could result in serious injury.
STARTING/STOPPING THE BLOWER
See Figure 4.
To start the blower, depress the switch trigger.
To stop the blower, release the switch trigger.
TURBO BOOST
See Figure 4.
While the switch trigger is depressed, press the turbo boost to increase the air flow to the maximum velocity.
NOTE: The blower will return to the previously selected speed when the button is released.
OPERATING THE BLOWER
See Figure 5.
To keep from scattering debris, blow around the outer edges of a debris pile. Never blow directly into the center of a pile.
8 — English
advertisement