Calibration. Brinly-Hardy BS26BH 28 Pages

Calibration. Brinly-Hardy BS26BH
Add to My manuals

Brinly-Hardy BS26BH is a broadcast spreader designed for use with riders and lawn/garden tractors. It has a hopper capacity of 125 lbs. and can spread a variety of materials, including seeds, fertilizers, and ice melt. The BS26BH features a durable steel frame, pneumatic tires, and a flow control handle that allows you to adjust the spread width. It also has an adjustable directional control plate that allows you to direct the spread pattern.

advertisement

Ask Al about Calibration. Brinly-Hardy BS26BH

Chatbot has read manual and is ready to answer your questions.

Manual
Calibration. Brinly-Hardy BS26BH | Manualzz

Figure 11.

CALIBRATE GAGE PLATE

11a. Loosen the knob (29) and move to the

#10,OPEN position, retighten.

11b. Move Flow Control Handle (31) to the

#10, OPEN position.

11c. Ensure that hopper control gate (47) opens fully, if not slide the gage plate

(11) forward or backward until control gate is fully open

11d.Tighten gage plate securely to theTow

Tube (28) by tightening the hardware installed in Step 10c.

11e. Move Flow Control Handle to the

CLOSE position, verify hopper control gate fully closes.

11f Tighten Flow Control Handle securely to the gage plate by tightening hardware assembled in Step 9c.

Your broadcast spreader is now ready for operation.

CALIBRATION

31 12

11

28

29

L-1884-A

17.

advertisement

Related manuals