Operational Safety instructions. Jacuzzi FUZ7260CCR5CHY, FUZ7242CCR5IWW 77 Pages
Operational Safety instructions. Jacuzzi FUZ7260CCR5CHY, FUZ7242CCR5IWW
advertisement
Salon™ Spa Bath
Operational Safety instructions
WARNING: RISK OF HYPERTHERMIA AND POSSIBLE DROWNING!
Do not use a hydromassage bathtub equipped with a heater immediately following strenuous exercise.
WARNING: RISK OF ELECTRICAL SHOCK!
•
Do not permit electrical appliances (such as a hair dryer, lamp, telephone, radio or television)
within 60˝ (1524mm) of this hydromassage bathtub.
•
Do not operate hydromassage system unless the bath is filled with water to at least 1-2˝
•
Do not immerse the control panel by overfilling the bath.
When cleaning your bath, do not use abrasive substances which will damage the bath’s
•
To prevent discoloration of the acrylic finish, do not fill the bath with water in excess of
WARNING: PROLONGED IMMERSION IN HOT WATER MAY INDUCE HYPERTHERMIA!
Hyperthermia occurs when the internal temperature of the body reaches a level several degrees above the normal body temperature of 98.6°F (37°C). The symptoms of hyperthermia include an increase in the internal temperature of the body, dizziness, lethargy, drowsiness and fainting. The effects of hyperthermia include:
A.
B.
C.
D.
E.
F.
Failure to perceive heat.
Failure to recognize the need to exit the bath.
Unawareness of impending hazard.
Fetal damage in pregnant women.
Physical inability to exit the bath.
Unconsciousness resulting in danger of drowning.
WARNING: RISK OF FETAL INJURY!
Pregnant or possibly pregnant women should consult a physician before using a hydromassage bathtub equipped with a heater.
WARNING: Keep body and hair a minimum of 6˝ (152mm) away from the suction fitting at all times when the hydromassage system is in operation. Hair longer than shoulder length should be secured close to the head.
WARNING: The use of alcohol, drugs or medication can greatly increase the risk of fatal hyperthermia.
People using medications or having an adverse medical history should consult a physician before using a hydromassage bathtub equipped with a heater.
WARNING: Do not tamper with user-operated controls or such devices.
WARNING: Use this unit only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturers.
WARNING: To avoid injury, exercise caution when entering or exiting the hydromassage bathtub.
WARNING: Do not use hydromassage bathtub unless all suction guards are installed to prevent body and hair entrapment. Never operate the hydromassage bath if the suction cover is broken, damaged or missing.
WARNING: Water temperature in excess of 104°F (40°C) may be injurious to your health. Check and adjust
CAUTION: water temperature before use.
Test the ground fault circuit interrupter protecting this appliance periodically in accordance with manufacturer’s instructions.
IMPORTANT: Read the complete instructions provided in this manual before beginning installation.
IMPORTANT: For optimal operation, the water level must remain at 1˝ to 2˝ (25mm to 50mm) above the highest jet; do not use oil-based bathtub additives in your hydromassage bathtub.
The Company has obtained applicable code (standards) listings generally available on a national basis for products of this type. It is the responsibility of the installer/owner to determine specific local code compliance prior to installation of the product. The Company makes no representation or warranty regarding, and will not be responsible for any code compliance. Product specifications are subject to change without notice.
Installation and Operation www.jacuzzi.com
Page 5
advertisement
Related manuals
advertisement
Table of contents
- 3 Contents
- 3 Product Information
- 4 Safety instructions
- 5 Operational Safety instructions
- 6 Inspection and Testing
- 7 Framing
- 11 Electrical Connections
- 13 Drop-in Installation
- 15 Undermount Installation
- 15 Cleanup
- 16 General Operation Information
- 16 Blower Operation
- 18 Purging Air Channels
- 19 Whirlpool Operation
- 20 Controlling Whirlpool Direction and Flow
- 21 Purging the Whirlpool System
- 21 Bathtub Additives
- 22 Maintenance
- 23 Troubleshooting Procedures
- 24 Authorized Service
- 25 Warranty
- 29 Contenido
- 29 Información del producto
- 30 Instrucciones de seguridad
- 31 Instrucciones de seguridad operacional
- 32 Inspección y prueba
- 33 Estructura
- 37 Conexiones eléctricas
- 39 Instalación empotrada
- 41 Instalación de montaje bajo cubierta
- 41 Limpieza
- 42 Información general sobre el funcionamiento
- 42 Funcionamiento del generador de burbujas de aire
- 44 Depuración de canales de aire
- 45 Funcionamiento Whirlpool
- 47 Aditivos para baño
- 47 Purga del sistema Whirlpool
- 47 Mantenimiento
- 49 Procedimientos para la resolución de problemas
- 50 Servicio técnico autorizado
- 51 Warranty
- 54 Contenu
- 54 Product Information
- 55 Directives de sécurité
- 56 Instrucciones de seguridad operacional
- 57 Inspection et essai
- 58 Cadrage
- 62 Connexions électriques
- 64 Installation par le dessus
- 66 Installation en dessous
- 66 Nettoyage
- 67 Renseignements généraux sur l’utilisation
- 67 Fonctionnement du ventilateur
- 69 Purge des canaux d’air
- 70 Fonctionnement du bain tourbillon
- 71 Contrôle de la direction et du débit du bain tourbillon
- 72 Vidange du système du bain tourbillon
- 72 Additifs pour baignoire
- 73 Entretien
- 74 Procédures de dépannage
- 75 Service autorisé
- 76 Garantie