Whirlpool Operation. Jacuzzi FUZ7260CCR5CHY, FUZ7242CCR5IWW

Salon™ Spa Bath

Whirlpool Operation

ON: Press the jet button once to turn the whirlpool jets

ON.

The whirlpool motor will be on high speed. The indicator lights at left will illuminate brightly.

OFF: Press the jet button a second time to turn the whirlpool jets OFF.

If in chromatherapy lighting mode or blower mode

(indicator lights to the left of the jet button are dim), you will need to press jet button once to resume whirlpool operation mode and then a second time to turn the whirlpool power off.

Decrease Speed

Press the (-) button to decrease whirlpool speed.

There are 2 whirlpool motor speeds, high and low. The indicator lights display the setting.

•

1 light on = Low speed

4 lights on = High speed

Increase Speed

Press the (+) button to increase whirlpool speed.

There are 2 whirlpool motor speeds, high and low. The indicator lights display the setting.

•

1 light on = Low speed

4 lights on = High speed

Low High

Low High

Jet

Air Flow

Press the left air valve button to activate the left air valves, press the right air valve button to activate the right air valves.

The amount of air induced into the whirlpool jets can be controlled from maximum to none. Use the (+) and (-) buttons to increase or decrease air flow.

The indicator lights immediately to the left and right of the air valve buttons indicate the amount of air induced (show images of max = 4 lights and off = 1 light).

Left Right

Installation and Operation www.jacuzzi.com

Page 19