Assembly. Home Decorators Collection 118120

Assembly

1

Attaching the door bumper

Locate the Left Partition (B).

Attach the Door Bumpers (EE) to the Left Partition as indicated using the provided Screws (DD).

Secure the screws using a Phillips screwdriver.

Repeat on the Right Partition (C).

2

Preparing the center assembly

Locate the Top Surround Rail (D).

Insert Wood Dowels (FF) into each end of the

Top Surround Rail (D) as indicated.

D

B

DD

EE

FF

C

3

Assembling center panels

Align the Wood Dowels (FF) on the Top Surround Rail

(D) with the predrilled holes on the Left Partition (B) and Right Partition (C).

Press the Left Partition (B) and Right Partition (C) together, securing the Top Surround Rail (D) between them.

B

D

FF

C

8

Assembly (continued)

4

Preparing the center shelf

Locate the Center Shelf (E) and place it on a flat surface.

Insert Cam Lock Screws (BB) into the pre-drilled holes on the Center Shelf (E) as shown.

Tighten using a Phillips Screwdriver.

Next, insert Wood Dowels (FF) into the pre-drilled holes where indicated.

5

Preparing the center assembly

Align the cam lock screws and wood dowels on the

Center Shelf (E) with the pre-drilled holes along the edges of the center assembly.

Secure the shelf to the center assembly by inserting the

Cam Lock Connectors (CC) into the pre-drilled holes as shown.

Use a Phillips screwdriver to tighten all the Cam Lock

Connectors (CC). Repeat until all have been secured.

BB

FF

E

CC

E

6

Attaching the surround bracket

Find the Metal Plate (SS) on the back of the

Top Surround Rail (D).

Rotate the Metal Plate (SS) to span the joint and secure with a Screw (MM) on the right partition.

Repeat on the other side to secure with the left partition.

SS

MM

D

9

HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

FF

Assembly (continued)

7

Attaching the surround bracket

Insert Wood Dowels (FF) into the edges of the Center

Shelf (E) as indicated.

8

Attaching the door hinges

Locate the Left Side Panel (F) and Right Side Panel (H).

Locate the Euro Hinge (GG) and secure both the upper and lower hinge as indicated to the Left Side Panel (F) using the pre-attached screws.

Repeat for the Right Side Panel (H).

GG

F

E

H

9

Preparing the side panels for assembly

Insert Cam Lock Screws (BB) into the predrilled holes in the Left Side Panel (F) and secure using a Phillips screwdriver.

Repeat for Right Side Panel (H).

BB

F

H

10

Assembly (continued)

10

Attaching the side panels

Align the cam lock screws on the center assembly with the pre-drilled holes on the Left Side Panel (F).

Secure the side panel onto the center assembly using the Cam Lock Connectors (CC). Tighten with a

Phillips screwdriver.

Repeat for the Right Side Panel (H).

11

Preparing for the bottom assembly

Insert Wood Dowels (FF) into the bottom edges of the center assembly as indicated.

CC

H

F

FF

12

Attaching the bottom shelf

Locate the Bottom Shelf (A).

Align the wood dowels on the bottom of the main assembly with the pre-drilled holes on the Bottom

Shelf (A). Press the dowels firmly into the holes.

Secure the Bottom Shelf (A) onto the main assembly with the Screws (II) using a Phillips screwdriver.

11

A

II

HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

Assembly (continued)

13

Preparing the base panel

Place the Base Rails (I, J, K, L) on a flat surface.

Insert Bolts (JJ) through the 2 Hole Plastic Connector

Blocks (KK).

Tighten with a Phillips screwdriver.

14

Attaching the base panels

Align the Base Left Side Rail (J) with the Base Back Rail

(I) and push together.

Secure with the Bolts (JJ) using a Phillips screwdriver.

Repeat to attach the Base Right Side Rail (K).

JJ KK

JJ

I

L

K

J

15

Attaching the front base panel

Align the Base Front Rail (L) with the previously assembled aprons.

Secure with Bolts (JJ) using a Phillips screwdriver.

L

K

I

J

12

I

J

JJ

K

Assembly (continued)

16

Attaching the base panels

To attach the previously assembled aprons to the bottom of the main assembly, insert Bolts (JJ) through the Plastic Connector Blocks as indicated.

Tighten using a Phillips screwdriver.

17

Preparing the center shelf for assembly

Insert Wood Dowels (FF) into the center of the

Center Shelf (E) on the main assembly as indicated in the diagram.

Insert Cam Lock Screws (BB) into the predrilled holes of the Center Shelf (E) on the main assembly and secure using a Phillips screwdriver.

JJ

BB

FF

E

18

Attaching the upper partition

Locate the Upper Partition (M).

Align the Upper Partition (M) with the previously installed wooden dowel and cam lock screws on the Center Shelf (E).

Using the Cam Lock Connectors (CC). Tighten with a Phillips screwdriver.

E

M CC

13

HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

Assembly (continued)

19

Preparing the top of the assembly

Insert Wood Dowels (FF) into the pre-drilled holes in the top edges of the main assembly.

20

Preparing the top panel

Place the Top Panel (G) onto a flat surface.

Insert the Cam Lock Screws (BB) into the pre-drilled holes in the bottom of the Top Panel (G).

Tighten the Cam Lock Screws (BB) using a Phillips

Screwdriver.

FF

BB

G

21

Attaching the top panel

Place the Top Panel (G) onto the main assembly by aligning the previously installed cam lock screws and wood dowels with the pre-drilled holes.

From underneath, secure the cam lock screws by inserting

Cam Lock Connectors (CC) into the pre-drilled holes.

Tighten using a Phillips Screwdriver.

G

CC

14

Assembly (continued)

22

Covering the screws

Push Plastic Covers (LL) into the screw hole openings of areas that have already been assembled.

23

Installing the back panels

Attach the Upper Back Panel (N) and the Side Back

Panels (O) by inserting the Screws (MM) through the pre-drilled holes in the Upper Back Panel (N) and the

Side Back Panels (O).

Tighten using a Phillips Screwdriver.

LL

MM

N

O

O

24

Preparing the doors

Locate the Euro Hinges (GG).

Secure the hinges onto the Doors (P) using the Screws (HH).

Attach both the upper and lower hinges on each door as indicated by the diagram.

HH

P

GG

P

15

HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

Assembly (continued)

25

Attaching the handles

Locate the Door Handles (NN) and use pre-attached screws to secure onto the Doors (P).

26

Attaching the doors

Slide the previously installed Euro Hinge (GG) on the

Left Door (P) into the left side of the main assembly as shown. Secure each hinge with the pre-attached screw.

Repeat for the Right Door (P) on the right side of the main assembly.

NN

GG

P

P P

27

Attaching the adjustable shelves

Insert the Shelf Pins (AA) into the pre-drilled holes on the inside of both the left and right side cabinets.

Rest the Adjustable Shelf (Q) on top of the

Shelf Pins.

16

AA

Q

P

Q

Assembly (continued)

28

Installing the fireplace insert into the mantel assembly

Lift the Fireplace Insert (S) carefully into the back of the unit and center in the fireplace insert opening.

Do not drag the fireplace insert across the Base (A) as it may scratch your unit.

A

S

29

Securing the fireplace insert

Align the Metal Brackets (QQ) behind the fireplace insert and above the pre-drilled holes.

Secure with the mounting Screws (DD) on both sides.

DD QQ

17

HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

Assembly (continued)

30

Installing the tipping restraint hardware

When the Tipping Restraint Hardware (OO) is properly installed, it can provide protection against unexpected tipping of the Unit due to small tremors, bumps or climbing.

Your Unit comes with two Tipping Restraint Hardware

(OO). Each Tipping Restraint Hardware (OO) includes one Unit Anchor, one Wall Anchor, one Anchor Tether, and four Anchor Screws. Use these to complete the following steps for a proper installation.

Locate a secure wall stud behind the unit closest left side.

Align the Unit Anchor with a wall stud and attach with two Anchor Screws using a Philips Head Screwdriver.

The Anchor Screws must pass through the Top Panel

(G) for proper installation.

Align the Wall Anchor in the center of the wall stud, at level with the Unit Anchor, and attach with two Anchor

Screws using a Philips Head Screwdriver.

On the Anchor Tether, detach the cable from the connector and loop the loose cable through the eyelets on the Wall Anchor and Unit Anchor. Reattach the loose cable to the connector, but do not tighten.

Locate a secure wall stud behind the unit closest to the right side, and repeat the steps above.

Tighten both Anchor Tethers by pulling the cable the through connector.

NOTE: Installation of the Tipping Restraint Hardware

(OO) will provide a small space between the wall and the unit. This will allow you to run power cords and connector cables to your television or other devices placed on top of the Unit.

WARNING: Installing the Tipping Restraint

Hardware will help prevent accidents or damage to the unit.

Wall

G

OO

18