Home Decorators Collection SP6666 is a 42-inch infrared wall mount electric fireplace. It features a realistic flame effect, adjustable heat settings, and a timer function. SP6666 provides warmth and ambiance to any room, creating a cozy and inviting atmosphere. It can be mounted on the wall or used as a freestanding unit. The fireplace also includes a remote control for convenient operation.
advertisement
Operation
The fireplace can be operated by either the remote control or the control panel.
Power Up
Down
Mode
Control Panel
Power
Mode
Up
Down
16
Operation (continued)
1
Powering the Fireplace
□ Push the Power button to supply power to all functions of the fireplace and put the insert in a standby mode.
□ Push the Power button again to turn off all functions.
□ When the unit is in ON mode, the power icon indicator light is green.
□ When the unit is in OFF mode, the power icon indicator light is red. When the power is OFF, the unit stops working. If the heater was operating before the power was turned OFF, the fan will continue to run for 30 seconds to ensure there is no heat trapped inside the unit.
NOTE: The unit has a memory function with last settings for heating level and flame brightness effect, unless the main power to the unit has been interrupted.
NOTE: When you plug in the unit each time, an internal check program runs for 5 seconds before the fan and heater turn on.
2
Mode Button
□ Press the Mode button to cycle through the different functions. Each time the Mode button is pressed, the mode will enter the next function - Temperature, Timer, Flame
Brightness, Ember Bed Brightness or Ember Bed Color.
Temperature
Ember bed Color
Timer Flame Brightness
Ember bed Brightness
3
Adjusting the Temperature
□ The temperature mode controls the heater’s thermostat setting.
□ Press the Up or Down buttons to select the desired temperature.
□ The thermostat setting range is 59°F (15°C) to 86°F (30°C),
ON & OF (OFF).
□ When the ambient temperature is higher than the set temperature, heater will turn off automatically.
NOTE: Hold the Mode button for 3 seconds. This allows the temperature unit to change from °C to °F or °F to °C.
The unit default is °F. This function is only available if using the control panel.
4
Setting the Timer
□ The timer setting should be used to set the countdown for the unit’s main power.
□ Push the Mode button to enter timer mode.
□ Press the Up or Down buttons to adjust the timer setting from 0 hour (OFF) to 9 hours with 0.5 hour interval.
17 HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Operation (continued)
5
Adjusting the Flame Brightness
□ The flame brightness mode should be used to set the flame brightness.
□ Use Up or Down buttons to scroll through the flame brightness settings: F0 (Flame OFF), F1, F2, F3, F4, F5
(brightest).
6
Adjusting the Ember Bed Brightness
□ The ember bed brightness mode should be used to set the ember bed brightness.
□ Use Up or Down buttons to scroll through the ember bed brightness settings: L0 (lowest), L1, L2, L3, L4, L5 (brightest).
7
Adjusting the Ember Bed Color
□ The ember bed color mode should be used to set the ember bed color.
□ Use Up or Down button to scroll through the ember bed color settings: C1, C2, C3, C4, C5, C6, C7, C8
Setting
C1
C2
C3
C4
C5
C6
C7
C8
Color
Green
Blue
Red
Blue + Green
Red + Green
Red + Blue
Red + Blue + Green
Auto Change
(Logset brightness
Fade In / Fade Out)
8
Using the Child Lock feature
□ When the unit is ON, hold the Power button for 10 seconds to activate the Child Lock function. E3 will be displayed and flash 3 times. When E3 is ON, heater is locked, E3 will display when adjust temperature setting.
□ To deactivate the Child Lock function, hold the Power button for 10 seconds.
NOTE: Child lock function is only available if using the control panel.
18
advertisement
Key Features
- Infrared heat
- Wall mount/Freestanding
- Adjustable heat
- Timer function
- Remote control
- Realistic flame