Selecting HID Prox Card Transmission Format. Rosslare AYC-E60

Reader Operation

Option 8: 1 to 8 Keys BCD, Clock & Data

Option 8 buffers up to 8 keys and outputs keypad data without a

Facility code like standard Clock and Data card output.

The keypad PIN code can be one to eight digits in length. The PIN code length is selected while programming the reader for Option 8.

The reader transmits the data when it receives the last key press of the PIN code. The data is sent across the two data output lines as binary data in Clock & Data format.

If * or # is pressed during PIN code entry, the keypad clears the PIN code entry buffer, generates a beep, and is ready to receive a new keypad PIN code.

If the entry of the keypad PIN code is disrupted and a number key or # is not pressed within 5 seconds, the keypad clears the PIN code entry buffer, generates a medium length beep, and is ready to receive a new keypad PIN code.

Option 9: Single Key, Wiegand 4-Bit

With this option, each key press immediately sends 4 bits of data, with no parity bits added.

0 = 0000

1 = 0001

2 = 0010

3 = 0011

4 = 0100

5 = 0101

6 = 0110

7 = 0111

8 = 1000

9 = 1001

*= 1010 ="A" in Hexadecimal

#=1011 ="B" in Hexadecimal

3.2.4

Selecting HID Prox Card Transmission Format

The AYC-E60 can read all HID Prox cards/tags (125 kHz) using

Genuine HID Technology and outputs HID Prox card data in

Wiegand format according to the number of bits of data stored on the card.

24 AYC-E60 Installation and Programming Manual