Changing the Normal/Secure Code. Rosslare AYC-E60

Controller Operation

4.9.6

Changing the Normal/Secure Code

• Code 0000 erases the Normal/Secure code.

• This code is disabled if the Auxiliary Input is set to toggle between

Normal and Secure access modes.

• The default Normal/Secure code is 3838.

To change the Normal/Secure code:

1.

Enter Programming mode.

2.

Press 4 to enter Menu 4.

Green

The left LED flashes red.

Red Green

3.

Enter the new Normal/Secure code.

You hear three beeps.

The system returns to Normal mode. Green

4.9.7

Changing the Normal/Bypass Code and Door

Chime Settings

To change the Normal/Bypass code and door chime settings:

1.

Enter Programming mode.

Green

2.

Press 5 to enter Menu 5.

The left LED flashes orange.

Orange Green

3.

There are four different ways to program the Normal/Bypass code and door chime:

Disable both Bypass code and the door chime. Enter the code 0000 .

Disable Bypass code and enable the door chime. Enter the code 0001 .

AYC-E60 Installation and Programming Manual 41