Setting the Backlight Behavior. Rosslare AYC-E60

Controller Operation

4.9.11

Setting the Backlight Behavior

The controller allows you to define the way the unit’s backlight works.

To set the backlight behavior:

1.

Enter Programming mode.

Green

2.

Press 6 to enter Menu 6.

The left LED flashes green.

Green Green

3.

Enter one of the following codes:

 5000 – Backlight off

 5100 – Backlight on (default)

 5200 – Backlight is off, activates for 10 seconds when a key is pressed, after which it dims until off

 5300 – Backlight is dimmed, activates for 10 seconds when a key is pressed, after which it returns to a dimmed level

4.9.12

Selecting the Credential Format

To select the credential format:

1.

Enter Programming mode.

Green

2.

Press 6 to enter Menu 6.

The left LED flashes green.

Green Green

3.

Enter one of the following codes:

 6100 – Rosslare Proximity

 6200 – HID Prox

 6300 – Rosslare Proximity + HID Prox (default)

50 AYC-E60 Installation and Programming Manual