Deleting Primary and Secondary Codes. Rosslare AYC-E60

Controller Operation

4.

Perform one of the following:

 Enter the PIN code belonging to the user for whom you wish to add a Secondary code.

 Present the user card belonging to the user for whom you wish to add a Secondary code.

The left LED flashes red.

Red Orange

If the Primary code entered is not valid, you hear a long beep and the unit continues to wait for a valid Primary code.

5.

Perform one of the following:

 Enter the PIN code to be used as the

Secondary code.

 Present the user card to be used as the Secondary code.

If the Secondary code is valid, the controller beeps three times and returns to Normal mode.

If the Secondary code is invalid, the controller sounds a long beep, and the unit continues to wait for a valid Secondary code to be entered.

4.9.14

Deleting Primary and Secondary Codes

There are two methods to delete Primary and Secondary codes: the

Standard Method and the Code Search Method.

When deleting a user slot, both the Primary code and the Secondary code are erased.

It is recommended that a record be kept of added and deleted users so that it is easier to keep track of which user slots are empty and which user slots are not.

54 AYC-E60 Installation and Programming Manual

Controller Operation

4.9.14.1

Deleting Primary and Secondary Codes using the

Standard Method

To delete the Primary and Secondary codes using the Standard

Method:

1.

Enter Programming mode.

2.

Press 8 to enter Menu 8.

Green

The left LED turns red and the right LED turns orange.

3.

Enter the 3-digit User Slot code you wish to delete.

The left LED flashes red indicating the controller is waiting for the Programming code to confirm the deletion.

Red Orange

Red Orange

If the user slot is empty, you hear a long beep and the unit returns to Normal mode.

4.

Enter your 4-digit Programming code to confirm the deletion.

If the Programming code is valid, three beeps are heard and the controller returns to Normal mode.

If the Programming code is invalid, a long beep is heard and the controller returns to Normal mode.

AYC-E60 Installation and Programming Manual 55

Controller Operation

4.9.14.2

Deleting Primary and Secondary Codes using the Code

Search Method

To delete the Primary and Secondary codes using the Code Search

Method:

1.

Enter Programming mode.

2.

Press 8 to enter Menu 8.

Green

The left LED turns red and the right LED turns orange.

3.

Enter 000 as the 3-digit user slot number.

Red Orange

The right LED flashes orange.

4.

Perform one of the following:

Red Orange

 Enter the PIN code of the Primary code belonging to the user you want to delete.

 Present the user card of the Primary code belonging to the user you want to delete.

The left LED flashes red.

5.

Red Orange

Enter your 4-digit Programming code to confirm the deletion.

If the Programming code is valid, you hear three beeps and the unit returns to Normal mode.

If the Programming code is invalid, you hear a long beep and the unit returns to Normal mode.

56 AYC-E60 Installation and Programming Manual