Relay Codes Assignment. Rosslare AYC-E60

Controller Operation

4.9.15

Relay Codes Assignment

When a Primary code is enrolled for any user, the user is authorized to activate the Lock Strike relay. However, different user codes may be set to operate the auxiliary relay instead or operate both the

Lock strike and auxiliary relay. Assigning such codes is possible for any valid user code entered in the controller. There are two methods to assign relay codes to users: a standard method and a search method.

4.9.15.1

Relay Code Assignment using the Standard Method

To assign relay code using the Standard method:

1.

Enter Programming mode.

Green

2.

Press 9 to enter Menu 9.

The left LED turns green and the right LED turns orange.

Green Orange

3.

Enter the 3-digit user slot for code assignment.

The left LED flashes green.

Green Orange

4.

Enter the assignment digit for the current user slot:

 1 activates the Lock Strike relay only default

 2 activates the Auxiliary relay only

 3 activates the Lock Strike and Auxiliary relays

If the assignment code is valid, the left LED stops flashing.

The controller is now waiting for another slot number.

AYC-E60 Installation and Programming Manual 57

Controller Operation

5.

Do one of the following:

 Press # to move to the next available user slot number.

 Enter another 3-digit user slot number.

If you do not wish to continue enrolling codes, press # twice and the controller returns to Normal mode.

4.9.15.2

Relay Code Assignment using the Search Method

To assign relay code using the Search method:

1.

Enter Programming mode.

2.

Press 9 to enter Menu 9.

Green

The left LED turns green and the right LED turns orange.

3.

Enter 000 for user slot access.

The right LED flashes orange.

4.

Do one of the following:

Green Orange

Green Orange

 Enter the PIN code of the Primary code belonging to the user you want to delete.

 Present the user card of the Primary code belonging to the user you want to delete.

5.

Green Orange

Enter the assignment digit for the current user slot:



The left LED flashes green.

1 activates the Lock Strike relay only default

 2 activates the Auxiliary relay only

 3 activates the Lock Strike and Auxiliary relays

58 AYC-E60 Installation and Programming Manual