Technical Specifications. Rosslare AYC-E60

Technical Specifications

5.

Technical Specifications

Electrical Characteristics

Power Supply Type

Operating Voltage Range

Linear (recommended)

6–16 VDC

(when used as a controller, provided by the secured intelligent power supply)

Input Current Standby (12 VDC) 110 mA

Input Current Max (16 VDC) 130 mA

LED Control Input

Tamper Output

Dry contact N.O.

Open collector, active low, 32 mA max sink current

Cable Distance to Host Controller Up to 150 m (500 ft) using an 18-AWG cable

Max. Proximity Card Read

Range*

Rosslare proximity: 40 mm (1.6)

HID Prox: 40 mm (1.6 in.)

Proximity Card Modulation

Proximity Card Compatibility

Rosslare proximity/HID Prox at 125 kHz

Rosslare proximity/HID Prox cards

Card Transmit Format (Reader) Rosslare proximity cards: Wiegand 26-bit, or Clock & Data

HID cards: According to card type

Programmable PIN code formats Keypad Transmit Format

(Reader)

LED Indicators

Communication

Two tri-colored LEDs

Data1/C1, Data0/C2–open collector,

5 V termination

* Measured using a Rosslare proximity card or equivalent. Range also depends on electrical environment and proximity to metal.

AYC-E60 Installation and Programming Manual 61

Technical Specifications

Environmental Characteristics

Operating Temp. Range

Operating Humidity Range

Outdoor Usage

-22°F to 150°F (-30°C to 65°C)

0 to 95% (non-condensing)

Weather-resistant, meets IP-65, epoxy potted, suitable for indoor and outdoor use

Physical Characteristics

Size

(Height x Width x Depth)

Weight

155 x 44 x 9 mm (6.1 x 1.7 x 0.4 in.)

143 g (5.0 oz)

62 AYC-E60 Installation and Programming Manual