Setting up your wireless mouse. Dell Premier Wireless Keyboard and Mouse KM717

Dell Premier Wireless Keyboard and Mouse KM717 provides a seamless wireless experience for increased productivity. Connect up to three devices using either Bluetooth or the Dell Universal USB receiver, allowing simple switching between devices. The keyboard features a dedicated Bluetooth pairing button and a connection mode switch for easy pairing. The mouse has a dedicated connection mode button and a DPI switch for adjusting cursor sensitivity. Both devices have power switches to conserve battery life.

PDF

Document

Setting up your wireless mouse

Installing batteries

1 Remove the mouse cover.

2 Open the battery clamp.

3 Install the AAA batteries into the battery compartment.

4 Close the battery clamp.

5 Replace the mouse cover.

6 Slide the power switch to power on the mouse.

NOTE: Make sure the distance between your computer and mouse is within 10 meters.

Pairing your wireless mouse

Your Dell wireless mouse can be paired with devices using USB and Bluetooth. You can pair and switch between a laptop, desktop, and a compatible mobile device.

Pairing with a USB device

You could connect a device to your wireless mouse using the Dell Universal pairing.

1 Install the Dell Universal USB receiver to the USB port on your computer.

2 The connection-mode light on the mouse turns on to indicate the Dell Universal pairing, then turns off.

3 The mouse is paired with your USB device.

Pairing with a Bluetooth device

You could connect up to two devices to your wireless mouse using Bluetooth.

Pairing device two using Bluetooth

You could connect a second device to your wireless mouse using Bluetooth.

1 Press the connection-mode button on your mouse until the connection-mode light indicates that the second-Bluetooth connection is selected.

2 The second-Bluetooth connection light starts blinking to confirm the pairing mode is enabled.

3 In Windows Search, type Bluetooth.

4 From the list that appears, click Bluetooth Settings.

5 Ensure that Bluetooth is enabled.

6 From the list of devices, click Dell WM527 → Pair.

NOTE: If Dell WM527 is not listed, ensure pairing mode is enabled on the mouse.

7 Confirm the pairing process on both mouse and device.

The second-Bluetooth connection light turns solid white for a few seconds to confirm the pairing and then the light turns off. After the mouse and a device are paired, they connect automatically when Bluetooth is enabled and they are within the Bluetooth range.

Pairing device three using Bluetooth

You could connect a third device to your wireless mouse using Bluetooth.

1 Press the connection-mode button on your mouse until the connection-mode light indicates that the third-Bluetooth connection is selected.

2 The second-Bluetooth connection light starts blinking to confirm the pairing mode is enabled.

3 In Windows Search, type Bluetooth.

4 From the list that appears, click Bluetooth Settings.

5 Ensure that Bluetooth is enabled.

6 From the list of devices, click Dell WM527 → Pair.

NOTE: If Dell WM527 is not listed, ensure pairing mode is enabled on the mouse.

7 Confirm the pairing process on both mouse and device.

The third-Bluetooth connection light turns solid white for a few seconds to confirm the pairing and then the light turns off. After the mouse and a device are paired, they connect automatically when Bluetooth is enabled and they are within the Bluetooth range.

Setting up your wireless keyboard

1 Remove the battery cover.

2 Install the AAA batteries into the battery compartment.

3 Replace the battery cover.

4 Slide the power switch to power on the keyboard.

NOTE: Make sure the distance between your computer and keyboard is within 10 meters.

Pairing your wireless keyboard

Your Dell wireless keyboard can be paired with devices using USB and Bluetooth. You can pair and switch between a laptop, desktop, and a compatible mobile device.