Computer Stand. Dell Precision 690


Add to My manuals
132 Pages

advertisement

Computer Stand. Dell Precision 690 | Manualzz

Computer Stand

CAUTION:

Your computer is heavy (it has an approximate minimum weight of 55 lbs) and can be difficult to maneuver. Seek assistance before attempting to lift, move, or tilt it; this computer requires a two-man lift. Always lift correctly to avoid injury; avoid bending over while lifting. See your Product Information Guide for other important safety information.

CAUTION:

The computer stand should be installed at all times to ensure maximum system stability. Failure to install the stand could result in the computer tipping over, potentially resulting in bodily injury or damage to the computer.

CAUTION:

Before you begin any of the procedures in this section, follow the safety instructions in the Product

Information Guide .

CAUTION:

To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.

NOTICE:

To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer’s electronic components. You can do so by touching an unpainted metal surface on the computer.

Attaching the Computer Stand

CAUTION:

Your computer is heavy (it has an approximate minimum weight of 55 lbs) and can be difficult to maneuver. Seek assistance before attempting to lift, move, or tilt it; this computer requires a two-man lift. Always lift correctly to avoid injury; avoid bending over while lifting. See your Product Information Guide for other important safety information.

CAUTION:

The computer stand should be installed at all times to ensure maximum system stability. Failure to install the stand could result in the computer tipping over, potentially resulting in bodily injury or damage to the computer.

1 Follow the procedures in "Before You Begin" in the User’s Guide .

2 If you have installed a security cable, remove it from the security cable slot.

3 Set the stand on the ground in front of the computer, so that the front and the back of the stand touch the ground.

If the front and the back of the stand point up toward the ceiling, the stand is upside down.

4 Ensure that the alignment guide faces the computer.

If the alignment guide points away from the computer, the stand is backwards.

Quick Reference Guide

27

1

3

2

1 computer

2 computer stand

3 alignment guide

5 Align the center of the stand with the center of the computer.

6 Carefully, with the help of an assistant, tilt the computer backwards slightly- just high enough to slide the stand beneath it.

7 Slide the rear of the stand into the rear foot of the computer, and ensure that the alignment guide slides into place.

8 Center the front bar of the stand in the corresponding notch in the front foot of the computer.

9 Carefully set the computer back down; the front bar of the stand should snap into place under the weight of the computer.

28

Quick Reference Guide

advertisement

Related manuals

Download PDF

advertisement

Table of contents