The Playback Menu
For more information about image editing functions; ( Quick retouch , D-
Lighting , Skin softening , Filter effects , Small picture and Black border ), see
“Editing Still Images” ( E 15).
a
Print Order (Creating a DPOF Print Order)
Press the c button (Playback mode) M d button (
A 13)
M a Print order
If you choose to use one of the following methods to print pictures that are stored on a memory card, the pictures to print and the number of copies can be set in advance on the memory card.
• Printing with a DPOF-compatible (
F 18) printer that is equipped with a card
slot.
• Ordering the prints to a digital photo lab that has a DPOF service.
•
Printing by connecting the camera to a PictBridge-compatible ( F 18) printer
(
E 25). (When the memory card is removed from the camera, the print order
can also be performed for the pictures stored on the internal memory.)
1
Use the multi selector to choose Select images , and press the
k
button.
Print order
Select images
Delete print order
2
Choose the pictures (up to a maximum of 99) and number of copies (up to nine per picture).
Print selection
• Rotate the multi selector or press J or K to choose the pictures, and press H or I to set the number of copies for each.
• Pictures selected for printing can be recognized by the check mark icon and the numeral indicating the number of copies to be printed. If no copies have been
Back specified for images, the selection is canceled.
• Rotate the zoom control toward g ( i ) to switch to full frame playback mode, or f
( h ) to switch to 12 thumbnail display.
• Press the k button when setting is complete.
E 55
The Playback Menu
3
Choose whether or not to also print shooting date and shooting information.
• Choose Date and press the k button to print the shooting date on all pictures in the print order.
• Choose Info and press the k button to print shooting information (shutter speed and aperture value) on all pictures in the print order.
• Choose Done and press the k button to complete the print order.
Pictures with the print orders are recognized by the w icon displayed in playback mode.
Print order
Done
Date
Info
15/05/2012
0004.JPG
B
Notes on Printing Shooting Date and Shooting Information
When the Date and Info options are enabled in the print order menu, shooting date and shooting
information can be printed on pictures when a DPOF-compatible ( F 18) printer which supports
printing of shooting date and shooting information is used.
• Shooting information cannot be printed when the camera is connected directly to a printer, via the included USB cable, for DPOF printing (
E 30).
• Date and Info are reset each time the Print order menu is displayed.
• The date and time printed on the picture are the same as those set on the camera when the picture was taken. The date and time printed using this option are not affected if the camera’s Time zone and date setting is changed from the setup menu after the pictures are taken.
C
Deleting All Print Orders
In step 1 of the print order procedure ( E 55), choose
Delete print order and press the k button to delete the print orders for all pictures.
C
Print Date
The shooting date and time can be imprinted on pictures at the time of shooting by using Print date (
E 79) in the setup menu. This information can be printed even from printers that do not
support printing of the date and time. Only the date and time of print date on the pictures are printed, even if Print order is enabled with the date selected in the print order screen.
C
More Information
See “Printing Images of Size 1:1” ( A 79) for more information.
E 56
The Playback Menu b
Slide Show
Press the c button (Playback mode) M d button (
A 13)
M b Slide show
View pictures stored in the internal memory or on a memory card in an automatic slide show.
1
Use the multi selector to choose Start , and press the
k
button.
• To change the interval between pictures, choose
Frame intvl , and press the k button, and then select the desired interval time before choosing Start .
• To repeat the slide show automatically, enable Loop and press the k button before choosing Start . The check mark ( w ) is added to the loop option when enabled.
2
The slide show begins.
• Press the multi selector K to display the next picture, or
J to display the previous picture. Press and hold K to fast forward, or J to rewind.
• To exit partway or pause, press the k button.
Slide show
Pause
Start
Frame intvl
Loop
3s
3
Choose End or Restart.
• After the last frame is played back or during playback pause, the screen shown on the right is displayed.
Choose G and press the k button to return to step 1.
Choose F to play the slide show again.
B
Notes on Slide Shows
•
Only the first frame of movies ( A 100) included in slide shows is displayed.
•
For sequences ( E 13) whose sequence display options are set to
Key picture only , only the key picture is displayed.
• Images captured using easy panorama are displayed full-frame when played in a slide show. They do not scroll.
• Slide shows play for a maximum of about 30 minutes, even when Loop is selected (
E 84).
E 57
The Playback Menu d
Protect
Press the c button (Playback mode) M d button (
A 13)
M d Protect
Protect selected pictures from accidental deletion.
In the image selection screen, choose a picture and set or cancel protection. See
“The Image Selection Screen” ( E 59) for more information.
Note, however, that formatting the camera’s internal memory or the memory card
( E 85) permanently erases the protected files.
Protected pictures are recognized by the s
icon in playback mode ( A 10).
E 58
The Playback Menu
The Image Selection Screen
The image selection screen is displayed in the following menus.
Only one image can be selected for some menu items, while for other menu items, multiple images can be selected.
Functions for which only one image can be selected
Functions for which multiple images can be selected
• Playback menu:
Rotate image ( E 60),
Choose key picture ( E 63)
• Setup menu:
Select an image in Welcome screen
(
E 74)
• Playback menu:
Select images
in Print order ( E 55),
Protect (
E 58),
Selected images
in Copy ( E 62)
• Erase selected images
in Delete ( A 36)
Follow the procedure described below to select images.
1
Rotate the multi selector, or press
J
or
K
to choose the desired image.
• Rotate the zoom control toward g ( i ) to switch to fullframe playback mode, or f ( h ) to switch to 12 thumbnail display.
• For functions for which only one image is selected, proceed to step 3.
2
Press
H
or
I
to select ON or OFF (or the number of copies).
• When ON is selected, a check mark ( y ) is displayed with the image. Repeat steps 1 and 2 to select additional images.
Erase selected images
Back
Erase selected images
ON/OFF
Back
3
Press the
k
button to apply the image selection.
• With selections such as Selected images , the confirmation dialog is displayed.
Follow the instructions on the screen.
ON/OFF
E 59
The Playback Menu f
Rotate Image
Press the c button (Playback mode) M d button (
A 13)
M f Rotate image
Change the orientation of pictures played back in the camera’s monitor after shooting. Still pictures can be rotated 90° clockwise or counterclockwise.
Pictures that were recorded in the “tall” orientation can be rotated up to 180° in either direction.
Select a picture in the picture selection screen (
E 59) to display the rotate image
screen. Rotate the multi selector, or press J or K to rotate the picture 90°.
Rotate image Rotate image Rotate image
Back Rotate
Rotated 90° counterclockwise
Back Rotate Back Rotate
Rotated 90° clockwise
Press the k button to set the orientation displayed and save the orientation data with the picture.
B
Notes on Image Rotation
• Images captured with cameras other than COOLPIX P510 cannot be rotated.
• Images captured using 3D photography cannot be rotated.
• While only the key picture of a sequence is displayed, images cannot be rotated. Apply the setting
after displaying individual images ( E 13,
E 63).
E 60
The Playback Menu
E
Voice Memo
Press the c button (Playback mode) M Select a picture M d
button ( A 13)
M E Voice memo
Use the camera’s microphone to record voice memos for pictures.
• The recording screen is displayed for a picture without voice memo, while the voice memo playback screen is displayed for a picture with voice memo (a picture marked with p in full-frame playback mode).
Recording Voice Memos
• Voice memo can be recorded for up to about 20 seconds while the k button is pressed.
• Do not touch the microphone during recording.
• During recording, o and p flash on the monitor.
• When recording ends, the voice memo playback screen is displayed.
Playing Voice Memos
Pictures for which voice memos have been recorded are indicated by p in full-frame playback mode.
• Press the k button to play back a voice memo. To end playback, press the k button again.
• Rotate the zoom control toward g or f during playback to adjust playback volume.
• Press the multi selector J before or after playing a voice memo to return to the playback menu. Press the d button to exit the playback menu.
Deleting Voice Memos
Press the l button on the voice memo playback screen.
Press the multi selector H or I to select Yes and press the k button to delete only the voice memo.
File will be deleted. OK?
Yes
No
B
Notes on Voice Memos
• When a picture with a voice memo attached is deleted, both the picture and its voice memo are deleted.
• Voice memos cannot be recorded for a picture that already has a voice memo attached to it. The current voice memo must be deleted before a new voice memo can be recorded.
• Voice memos cannot be attached to pictures taken with cameras other than COOLPIX P510.
• Voice memos of the images with the Protect
setting ( E 58) cannot be deleted.
• Voice memos cannot be attached to pictures taken using easy panorama.
C
More Information
See “File and Folder Names” ( E 98) for more information.
E 61
The Playback Menu h
Copy (Copy Between Internal Memory and Memory
Card)
Press the c button (Playback mode) M d button (
A 13)
M h Copy
Copy pictures between the internal memory and a memory card.
1
Use the multi selector to select an option from the copy screen, and press the
k
button.
• Camera to card : Copy pictures from the internal memory to the memory card.
• Card to camera : Copy pictures from the memory card to the internal memory.
Copy
Camera to card
Card to camera
2
Select a copy option and press the
k
button.
• Selected images : Copy pictures selected from the
image selection screen ( E 59). If a sequence for which
only a key picture is displayed is selected ( E 13), all
pictures in the displayed sequence are copied.
Camera to card
Selected images
All images
• All images : Copy all pictures. If a picture in a sequence is selected, this option is not displayed.
• Current sequence : This option is displayed when a picture in a sequence has been selected before displaying the playback menu. All pictures in the current sequence are copied.
B
Notes on Copying Pictures
• JPEG-, MOV-, WAV-, and MPO-format files can be copied. Files recorded in any other format cannot be copied.
• Voice memo (
E 61) attached to pictures and
Protect setting (
E 58) are also copied with the
pictures.
• Pictures recorded with another make or model of camera or that have been modified on a computer cannot be copied.
• Print order settings(
E 55) are not copied with the pictures.
• If Sequence display options
( E 63) is set to
Key picture only and a picture in the sequence is selected and the k
button is pressed to display individual pictures ( E 13), only
Card to camera image copy is available.
E 62
The Playback Menu
C
Message: “Memory contains no images.”
If there are no pictures stored on the memory card when playback mode is selected, the message, the
Memory contains no images.
, is displayed. Press the d button and select Copy from the playback menu to copy the pictures stored in the camera's internal memory to the memory card.
C
More Information
See “File and Folder Names” ( E 98) for more information.
C
Sequence Display Options
Press the c button (Playback mode) M d button (
A 13)
M C Sequence display options
Choose the method used to display a series of pictures shot continuously
(sequence,
E 13) when viewing them in full-frame playback mode (
A 34) or in
thumbnail playback mode (
A 35).
Settings are applied to all sequences, and the setting is saved in the camera’s memory even if the camera is turned off.
Option Description
Individual pictures Each picture in a sequence is displayed.
Key picture only
(default setting)
Return a sequence in which pictures are displayed individually to the key picture only display.
x
Choose Key Picture
Press the c button (Playback mode) M Select the desired sequence M d button
( A 13)
M x Choose key picture
When Sequence display options is set to Key picture only , the key picture
displayed in full-frame playback mode ( A 34) or thumbnail playback mode
( A 35) can be set for each sequence of pictures.
• When changing this setting, before pressing d , first select the desired sequence using full-frame playback mode or thumbnail playback mode.
•
When the key picture selection screen is displayed, select a picture. See “The
Image Selection Screen” ( E 59) for more information.
E 63
