Add to my manuals
20 Pages


CARE AND CLEANING. Electrolux GK80TSPLCN | Manualzz


Heat setting Use to:

3 - 5

5 - 7

7 - 9

7 - 9

9 - 12

Simmer rice and milkbased dishes, heating up readycooked meals.

Steam vegetables, fish, meat. 20 - 45 Add some tablespoons of liquid.

Steam potatoes.

20 - 60 Use max. ¼ l water for 750 g of potatoes.

Cook larger quantities of food, stews and soups.

Gentle fry: escalope, veal cordon bleu, cutlets, rissoles, sausages, liver, roux, eggs, pancakes, doughnuts.




25 - 50 Add the minimum twice as much liquid as rice, mix milk dishes part procedure through.

60 -

150 as necessary

Up to 3 l liquid plus ingredients.

Turn halfway through.

12 - 13


Heavy fry, hash browns, loin steaks, steaks.

5 - 15 Turn halfway through.

Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips.




Refer to Safety chapters.

6.1 General information

• Clean the hob after each use.

• Always use cookware with clean bottom.

• Scratches or dark stains on the surface have no effect on how the hob operates.

• Use a special cleaner applicable for the surface of the hob.

• Use a special scraper for the glass.

6.2 Cleaning the hob

• Remove immediately: melted plastic, plastic foil, and food with sugar. If not,



the dirt can cause damage to the hob.

Put the special scraper on the glass surface at an acute angle and move the blade on the surface.

• Remove when the hob is sufficiently cool: limescale rings, water rings, fat stains, shiny metallic discoloration. Clean the hob with a moist cloth and some detergent. After cleaning, rub the hob dry with a soft cloth.


Refer to Safety chapters.


7.1 What to do if...


You cannot activate or operate the hob.

Possible cause

The hob is not connected to an electrical supply or it is connected incorrectly.

The fuse is released.


Check if the hob is correctly connected to the electrical supply. Refer to the connection diagram.

Make sure that the fuse is the cause of the malfunction. If the fuse releases again and again, contact a qualified electrician.

Activate the hob again and set the heat setting in less than 10 seconds.

Touch only one sensor field.

You touched 2 or more sensor fields at the same time.

STOP+GO function operates.

There is water or fat stains on the control panel.

You put something on one or more sensor fields.

Refer to "Daily use" chapter.

Clean the control panel.

An acoustic signal sounds and the hob deactivates.

An acoustic signal sounds when the hob is deactivated.

The hob deactivates.

Remove the object from the sensor fields.

Residual heat indicator does not come on.

Automatic Heat Up function does not operate.

The zone is hot.

The highest heat setting is set.

You cannot activate the outer ring.

You put something on the sensor field .

The zone is not hot because it operated only for a short time.

Remove the object from the sensor field.

If the zone operated sufficiently long to be hot, speak to an Authorised

Service Centre.

Let the zone become sufficiently cool.

The highest heat setting has the same power as the function.

Activate the inner ring first.

There is a dark area on the multiple zone.

It is normal that there is a dark area on the multiple zone.


Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals