4.3.6 NAT Passthrough. Asus RT-AC52U B1


Add to my manuals
129 Pages

advertisement

4.3.6  NAT Passthrough. Asus RT-AC52U B1 | Manualzz

74

• Enable wildcard : Enable wildcard if your DDNS service requires one.

NOTES :

DDNS service will not work under these conditions:

• When the wireless router is using a private WAN IP address (192.168.

x.x, 10.x.x.x, or 172.16.x.x), as indicated by a yellow text.

• The router may be on a network that uses multiple NAT tables.

4.3.6 NAT Passthrough

NAT Passthrough allows a Virtual Private Network (VPN) connection to pass through the router to the network clients.

PPTP Passthrough, L2TP Passthrough, IPsec Passthrough and RTSP

Passthrough are enabled by default.

To enable / disable the NAT Passthrough settings, go to the

Advanced Settings > WAN > NAT Passthrough tab. When done, click Apply .

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • 802.11ac dual-band wireless at up to 733 Mbps for high-performance wireless
  • Expanded wireless coverage with two fixed high-gain antennas
  • USB port for printer networking, storage sharing, or 3G/4G connections
  • ASUS AiCloud app to access, sync, share and stream your files on the go –quickly and easily
  • Easy 30 second setup and robust controls like network monitoring through ASUSWRT dashboard

Related manuals

advertisement

Table of contents