Inserting/Removing the Battery. Panasonic DMCLX2

Add to my manuals
136 Pages

advertisement

Inserting/Removing the Battery. Panasonic DMCLX2 | Manualzz

Preparation

Inserting/Removing the Battery

• Check that the camera is turned off and that the lens is retracted.

• Close the flash.

1

Slide the card/battery door to open it.

3

1

Close the card/battery door.

2

Slide the card/battery door to the end and then close it firmly.

2

1

• Always use genuine Panasonic batteries (CGA-S005E).

2

Insert:

Insert the charged battery paying attention to the direction of the battery.

Remove:

Slide the lock

A

to remove the battery.

A

• Remove the battery after use. Store the removed battery in the battery carrying case (supplied). (P8)

• When fully charged battery has been inserted for more than 24 hours, the clock setting is stored (in the camera) for at least 3 months even if the battery is removed. (The storing may be shorter if the battery is not charged sufficiently.) If more than 3 months have passed, the clock setting will be lost. In this case, set the clock again. (P19)

• Do not remove the card or the battery while the camera accesses the built-in memory or a card. The data may be damaged. (P16)

• Remove the battery after turning the camera off and making sure the LCD monitor and the status indicator

(green) are off. Otherwise, the settings on the camera may not be stored properly.

• The supplied battery is designed only for use with this camera. Do not use it with any other equipment.

14

VQT0Y60

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents