– Baby mode. Panasonic DMCLX2

Add to my manuals
136 Pages

advertisement

– Baby mode. Panasonic DMCLX2 | Manualzz

Advanced

Press [

MENU

SET

] to display the [SCENE MODE] menu and select a scene mode. (P61)

1

2

Baby mode 1

Baby mode 2

This mode adjusts the exposure and tone to bring out the healthy colour of your baby’s skin. The flash will be weaker than normal if you choose to use it.

You can set the birthdays of two babies by using [BABY1] and [BABY2].

1

19 n

Birthday setting

1

Select [BIRTHDAY SET.] and press

[MENU/SET].

2

[PLEASE SET THE BIRTHDAY OF THE

BABY] appears on the display. Select year/month/day with w

/ q

, then change the date with e

/ r

.

3

Press [MENU/SET] to exit.

• If you select [WITH AGE] but you haven’t set the birthday, a message appears.

Press [MENU/SET] and follow steps

2

and

3

to enter the birthday.

1 month 10days

10:00 1.DEC.2006

• The baby’s age appears when you are showing the picture later.

• You can also use the [LUMIX Simple

Viewer] or [PHOTOfunSTUDIO-viewer-] software on the included CD-ROM to print your baby’s age. (For details, refer to the separate operating instructions for PC connection.) n

Age display setting

• To show age, first enter the birthday, select [WITH AGE], and press [MENU/

SET].

• To not show age, select [WITHOUT AGE], and press [MENU/SET].

BABY1

WITH AGE

WITHOUT AGE

BIRTHDAY SET.

CANCEL SELECT SET

MENU

• The focus range is 5 cm (Wide)/30 cm

(Tele) to

Z

.

• The ISO sensitivity is fixed to [

ISO

].

• The auto bracket setting is disabled.

• The digital zoom is fixed to [OFF].

• After turning on the camera in [BABY1]/

[BABY2] in scene mode or switching to

[BABY1]/[BABY2] from other scene modes, the age and current date and time are displayed for about 5 seconds at the bottom of the screen.

• Actual age displays depend on the

[LANGUAGE] setting.

• The display style when printing may differ slightly from the display style on the screen.

• The display on the actual day of your baby’s birth will be 0 month 0 day.

• Check the clock and birthday settings if the age shown is incorrect.

• Note that if you have selected [WITHOUT

AGE], age information will not be recorded for any pictures you take. The information will not appear even if you select [WITH AGE] after taking pictures.

• For resetting the birthday setting, use

[RESET] in the [SETUP] menu. (P23)

68

VQT0Y60

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents