Setting the Auto Delay. Pioneer lx01bd

Add to My manuals
116 Pages


Setting the Auto Delay. Pioneer lx01bd | Manualzz Page 44 Tuesday, September 2, 2008 12:33 PM


Setting the Auto Delay

This feature automatically corrects the audio-to-video delay between components connected with an HDMI cable. The audio delay time is set depending on the operational status of the display connected with an HDMI cable. The audio delay time is automatically adjusted according to the video delay time.

1 Press SETUP.



2 Select ‘HDMI Setup’.



to select, then press ENTER .

3 Select ‘Auto Delay’.



to select, then press ENTER .

4 Select ‘A.Delay On’ or ‘A.Delay Off’.



to select, then press ENTER to confirm.


• This feature is only available when the connected display supports the automatic audio/video synchronizing capability

(‘lip-sync’) for HDMI or HDMI Control. If you find the automatically set delay time unsuitable, set A.Delay

to Off and adjust the sound delay settings manually (page 33).

About HDMI

HDMI (High-Definition Multimedia Interface) supports both video and audio on a single digital connection for use with DVD players,

DTV, set-top boxes, and other AV devices. HDMI was developed to provide the technologies of High-bandwidth Digital Content

Protection (HDCP) as well as Digital Visual Interface (DVI) in one specification. HDCP is used to protect digital content transmitted and received by DVI-compliant displays.

HDMI has the capability to support standard, enhanced, or highdefinition video plus standard to multichannel surround-sound audio. HDMI features include uncompressed digital video, a bandwidth of up to 2.2 gigabytes per second (with HDTV signals), one connector (instead of several cables and connectors), and communication between the AV source and AV devices such as


HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC.



Downloaded from

manuals search engine


Related manuals


Table of contents