Setting the HDMI options. Pioneer lx01bd

Add to My manuals
116 Pages

advertisement

Setting the HDMI options. Pioneer lx01bd | Manualzz

LX01BD_1.book Page 46 Tuesday, September 2, 2008 12:33 PM

09

• Connect the Flat Screen TV directly to this unit. Interrupting a direct connection with other amps or an AV converter (such as an HDMI switch) can cause operational errors.

Setting the HDMI options

HDMI Control-compatible

Pioneer Flat Screen TV

HDMI input

HDMI output

HDMI cable

You must adjust the settings of this unit as well as HDMI Controlcompatible connected components in order to make use of the

HDMI Control function. For more information see the operating instructions for each component.

Setting the HDMI Control mode

HDMI input

HDMI OUT

HDMI cable

Choose whether to set this unit’s HDMI Control function On or Off .

You will need to set it to Control On to use the HDMI Control function.

• When using a TV not manufactured by Pioneer, put this setting to Control Off .

1 Press SETUP.

HOME

MENU RETURN

46

En

Receiver subwoofer

• Only connect components you intend to use as a source to the

HDMI input of this unit. Interrupting a direct connection with other amps or an AV converter (such as an HDMI switch) can cause operational errors.

2 Select ‘HDMI Setup’.

Use

/

to select, then press ENTER .

TOP MENU

DISC

NAVIGATOR

TOOLS

MENU

HDMI Control-compatible

Pioneer Flat Screen TV

HDMI input

HDMI OUT

HDMI cable

Receiver subwoofer

HDMI IN

HDMI output

HDMI cable

HOME

MENU

SETUP

RETURN

3 Select ‘HDMI Ctrl’.

Use

/

to select, then press ENTER .

4 Adjust the setting.

Use

/

to adjust, then press ENTER to confirm.

• Control On – Enables the HDMI Control function. When this unit’s power is turned off and you have a supported source begin playback while using the HDMI Control function, the audio and video output from the HDMI connection are output from the Flat

Screen TV.

• Control Off – The HDMI Control is disabled. Synchronized operations cannot be used. When this unit’s power is turned off, audio and video of sources connected via HDMI are not output.

Before using synchronization

Important

• When connecting this system or changing connections, be sure to switch the power off and disconnect the power cord from the wall socket.

After completing all connections, connect the power cords to the wall socket.

• After connecting this unit to an AC outlet, a 15-second initialization process begins. You cannot carry out any operations during initialization. The HDMI indicator on the display unit blinks during initialization, and you can turn this unit on once it has stopped blinking.

• To get the most out of this function, we recommend that you connect your HDMI component not to a Flat Screen TV but rather directly to the HDMI terminal on this unit.

Once you have finished all connections and settings, you must:

1 Put all components into standby mode.

2 Turn the power ON for all components, with the power for the Flat Screen TV being turned on last.

3 Choose the HDMI input to which the TV is connected to this unit, and see if video output from connected components displays properly on the screen or not.

Downloaded from www.Manualslib.com

manuals search engine

advertisement

Related manuals

advertisement

Table of contents